Features:

• Sheet sander's 1.2 amp motor provides efficient sanding action
• Rubber posts isolate vibration
• Solid metal frame
• Includes clamp tool no. 846372, operator's manual.

Editorial Review:

1/4 Sheet Speed-Bloc Sheet Finishing Sander, 1.2A, AC/DC, 14,000 OPM, 100% Ball Bearings, Smooth, Low Vibration Design, Sands Flush & Into Corners, Use PSA Or Conventional Paper, Includes 120G Abrasive Sheet, Clamp Tool & Operating Manual.

Customer Reviews:

Avg. Customer Rating: 4.5 / 5.0

Hot potato:

This is a very heavy constructed piece of equipment. It feels good in your hand,although it feels twice as heavy as my Bosch,which means that you don't have to apply any pressure to sand as the weight of the machine does a good job of that. The vibration is substantially less than my Bosch,but it gets so hot that you can only use it a few minutes before you have to let it cool down for 20 minutes. I tried to use it longer, thinking that it would reach a peak and I could bear that,but that is not the case... more info

Simply the best in Palm sanders:

Have been using the 330 for 15 years Yes the same one all this time. I borrowed a new Dewalt random orbit sander to repair the handrails and posts on an old deck. It took less than 15 minutes to return to my old 330 to finish the job. For shier cutting, power and sanding ability nothing I have used in over 30 years of carpentry can match the Porter Cable 330 palm sander when a palm sander is the tool of choice. On the downside the Sticky pad for this sander does not hold up well. The glue on paper tends to... more info

Quiet and Smooth Operation.:

My Milwaukee palm sander finally died after years of faithful service, and I replaced it with this Porter-Cable model after reading the reviews. It is quieter than the Milwaukee and a lot easier on the hand because there's not as much vibration transfered to the housing that you grip when you hold it. The placement of the ON/OFF switch is really nice since it's located right where your fingers are as you hold the unit. You don't have to fumble around or look for the switch at all. The only beef I have is... more info

Good Sander!:

The sander is very heavy, feels like an old time tool... when they built tools with metal! The outer housing is isolated from the metal frame with rubber mounts and trasmits very littel vibration to the hand. It takes some time to get used to the paper clamps but sands flush to a wall on all 4 sides. This is the best palm/finish sander I have ever seen, used, or owned; and I have owned a lot. Also, recieved quickly and as advritized froom tool-king

Accessories:

Mirka 23-614-320 5" 5-Hole 320 Grit Dustless Hook & Loop Sanding Discs - 50... from Mirka (Tools & Hardware) - Usually ships in 24 hours

Porter-Cable 740001801 4 1/2-Inch x 10yd 180 Grit Adhesive-Backed Sanding Roll from Porter-Cable (Tools & Hardware) - Usually ships in 24 hours

Porter-Cable 740000801 4 1/2-Inch x 10yd 80 Grit Adhesive-Backed Sanding Roll from Porter-Cable (Tools & Hardware) - Usually ships in 24 hours

Porter-Cable 740001001 4 1/2-Inch x 10yd 100 Grit Adhesive-Backed Sanding Roll from Porter-Cable (Tools & Hardware) - Usually ships in 24 hours

Porter-Cable 740001201 4 1/2-Inch x 10yd 120 Grit Adhesive-Backed Sanding Roll from Porter-Cable (Tools & Hardware) - Usually ships in 24 hours

Similar Products:

Porter-Cable 740002201 4 1/2-Inch x 10yd 220 Grit Adhesive-Backed Sanding Roll from Porter-Cable (Tools & Hardware) - Usually ships in 24 hours

Porter Cable 13597 330 1/4 Sheet Replacement Pad from Porter Cable (Misc.)

Porter-Cable 740001201 4 1/2-Inch x 10yd 120 Grit Adhesive-Backed Sanding Roll from Porter-Cable (Tools & Hardware) - Usually ships in 24 hours

Porter-Cable 740000801 4 1/2-Inch x 10yd 80 Grit Adhesive-Backed Sanding Roll from Porter-Cable (Tools & Hardware) - Usually ships in 24 hours

Porter-Cable 740003201 4 1/2-Inch x 10yd 320 Grit Adhesive-Backed Sanding Roll from Porter-Cable (Tools & Hardware) - Usually ships in 24 hours

Porter-Cable 740001501 4 1/2-Inch x 10yd 150 Grit Adhesive-Backed Sanding Roll from Porter-Cable (Tools & Hardware) - Usually ships in 24 hours

Porter-Cable 740001001 4 1/2-Inch x 10yd 100 Grit Adhesive-Backed Sanding Roll from Porter-Cable (Tools & Hardware) - Usually ships in 24 hours

Porter-Cable 740001801 4 1/2-Inch x 10yd 180 Grit Adhesive-Backed Sanding Roll from Porter-Cable (Tools & Hardware) - Usually ships in 24 hours

Porter-Cable 690LR 11 Amp 1-3/4 Fixed Base Horsepower Router from Porter-Cable (Tools & Hardware) - Usually ships in 24 hours

Also visit Main Street Tool & Supply Co.

Sponsor Results: