Home / Tools / JET 708300K JWTS-10CW2-JF 10-Inch Right Tilt 1-1/2 Horsepower Contractor Saw with 30-Inch JETfence and 2 Cast Iron Wings, 115/230-Volt 1 Phase
10-inch right-tilt contractor saw with 30-inch fence and 2 wings; dust-collection hood
1-1/2-horsepower; 30-inch rip to right, 12-inch rip to left; mitre gauge with positive stops
Cast-iron table, wings, blade arbor; aluminum front guide rail
Includes saw, rip fence, 2 wings; blade not included
Editorial Review:
The two precision-ground, cast-iron wings set this saw apart from average contractor-style saws with steel wings. Heavy-duty cast-iron trunnions support the sealed ball-bearings' blade arbor housing for a smooth performance with minimal vibration. JET also uses totally enclosed fan-cooled motors, preventing overheating and dust infiltration and resulting in longer motor life and less risk of a fire hazard than with open motor housing. The stand for this saw is made of a tougher-gauge metal and has a 4-inch dust port for easy connection to a dust collector. Another user-friendly feature is the quick-connect electrical plug right at the saw, meaning you don't have to search out the wall socket prior to every blade change. JET has also located the on/off switch at the top left for easy access when a quick shutdown is required. A change in the hole pattern on the fence rails means lefties can now shift the set to their preferences. The fit, finish, and use of a more durable powder coating instead of paint will make a proud owner of every user--from the beginner who wants to learn with confidence to the seasoned pro who doesn't have space for a full-size cabinet saw. --Nancy Gleason
Customer Reviews:
Avg. Customer Rating: 4.5 / 5.0
I Have Upgraded My "10" to a 10CW2!!:
First of all, I must tell you that I am very glad to finally have a table saw. I have been shopping for over two years and was not really sure I wanted the Jet until the Christmas tool sale at Lowe's. Had it not been for that I can't say that I would have committed to this saw had it still been at full price. Actually, the Jet was my first pick but I had since developed some doubts about them. The bargain price lured me in (much better than here,) but if you're like me you want to know what I... more info
Great saw for the money:
I feel that the Jet JWTS-10CW2-JF is a darn good saw for the home woodshop. I upgraded from a bench-top saw to this one, so I can't say I've had years of experience with table saws. However, this saw is smooth, has cut everything I've fed it with no hesitation, and is very accurate. The saw arrives in two boxes, one for the saw/stand, and one for the jet fence. Unlike the previous reviewer, I wasn't missing any hardware from the fence box. In fact I had everything I needed except for one hex screw... more info
4 stars with Jet Fence - 5 with Xacta II:
This was my first Jet purchase. Runs very good. I never liked the Jet fence though, it seems a little short and I wish it had more support on the outfeed side. I ended up buying a xacta fence II which is made by HTC. Was like night and day. This functions almost like a cabinet saw, at least in my dreams with these additions: I replaced the v-belt with a link belt which made the saw quite and a bit smoother. I also replaced the manufacturer supplied trunion bolts in the saw with the PALS... more info
Great Saw:
I ordered this saw through Amazon. Assembly and instructions were pretty easy. I used a straight edge (that's used to check engine blocks & heads) for setting the wings and they are right on. I switched it over to 220, the saw has cut everything I threw at it with like butter. Problem still unresolved, the pivot pin for the miter gauge was missing. Call Jet and since I bought it from Amazon, I have to get parts through Amazon. So far it's been over 2 weeks and still no part. Was going to order the... more info
