Works with all 7 1/4 inch & 8 1/4 inch worm drive saws
Footplate & built in site ensures glide management
Vertical blade allows smooth, exact, square cuts
Will cut angles up to 45 degrees
Editorial Review:
Cuts angles up to 45 degrees. The vertical foot-plate and built-in sight allow smooth, exact square cuts and ensures gliding manageability while cutting perfectly straight lines. With a 12 in. cutting capacity, you can professionally execute the following cuts and many more: rafter pitch cut, miters, stairs, arches, log cuts, compound angles, bandsaw cut, notch 6x12 panels and ripping. Fits Skil models 77 and 5860; Makita model 5077B; Milwaukee models 6377 and 6378; Black & Decker models 2700, 2710 and 3051; Craftsman model 2761; and DeWalt model DW377.
Customer Reviews:
Avg. Customer Rating: 4.0 / 5.0
Does what it says:
I installed the Prazi on my Skil "77M" and used it to cut 11 7/8" engineered floor joists to length and square. It worked beautifully! No other "beam cutter" saw could cut that wide of joist in a single pass without cutting from the side of the joist. It also allows me to stack about 5 to 6 2x rafters up and cut the bird's mouth cuts all at once. I did find that the saw causes tear-out at the top of the cut, so it is a good idea to use a utility knife to scribe a line just outside the limits of the cut to... more info
Great Addition to any Toolbox!:
We used this to straight cut 6" beams, and 45' angles on 4" planks with ease. It was easy to assemble onto the Skil Saw and handled nicely. However, since it's a chainsaw type system that needs to be oiled occasionally, a bottle with a very fine tip needs to be used to oil the chain sprocket as the oil hole in the arm is quite small. The bottle is not included but should be. Additionally, it would be well worth the additional $20 to get the storage bag since it's shipping box will not last long to... more info
Buy it,you won't be sorry:
Hi,
I'm building a log home and needed a saw to cut
up to about eight inches of pine logs,so when i
saw the Prazi beam cutter i thought this is just
the tool i was looking for.
I did'nt have the rite saw either so i had to buy
a new skil mag77 and the combination was great,it
is smooth and the cuts are perpect,no vibration
of any kind,a real solid tool built to last a long
time.If you need cuts up to 12in this is your tool
buy it you won't be... more info
Paid for itself on the first job.:
After reading other reviews I was afraid to by this but I'm very pleased with the saw! I put it on a new Skil worm drive by simply removing the saw guard from the worm drive saw and attaching the Prazi in minutes. Other reviewers said that you are limited to a few saws and that's bull. This cuts clean and faster than a 15" saw and rolling the timbers to cut again. GREAT PRODUCT!!
