Features:

• 1-1/2" by .120 galvanized roofing coil nails
• 7,200 Per Pack
• Hitachi NV45AB, Bostitch N12B, RN45B
• Senco SCN200R, Makita AN451

Editorial Review:

7,200 Count, 1-1/2" Galvanized, Coil Roofing Nail.

Customer Reviews:

Avg. Customer Rating: 3.0 / 5.0

remodeler:

They fit the Dewalt 51321 nailer just fine. I also have used this system to install cement tile backer sheets around tub and shower framing. What a waste of time using a hammer!

There are better nails:

Yes, these nails do fit the PC RN 175 roofing nailer but they can be a pain to load and they seemed to jamb a little more often than the other brand nail (of identical length) that I used. I found it helped to not take a coil of nails out of the box since they sit in a pre-formed or molded container, until just before loading into the gun. I'm not a pro but I did get the job done and these tools are light years better than using a hammer & nail which is primitive in comparison.

Attention! Porter Cable Users:

If you own the Porter Cable RN 175, do not buy these nails. I tried to use these nails and they did not fit properly in the gun. However, if you have a Hitachi nail gun, they work fine. I was dissappointed because I thought they would work well with my Porter Cable gun. Happy Roofing!

Similar Products:

Bostitch RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer from Bostitch (Tools & Hardware) - Usually ships in 24 hours

B & C Eagle CR-114 1-1/4-Inch by .120-Inch by 15 Degree Galvanized Coil... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

Porter-Cable RN175A 7/8-Inch to 1-3/4-Inch Coil Roofing Nailer from Porter-Cable (Tools & Hardware) - Usually ships in 24 hours

DEWALT D51321 Heavy-Duty 3/4 Inch to 1-3/4 Inch Coil Roofing Nailer from DEWALT (Tools & Hardware) - Usually ships in 24 hours

Also visit Main Street Tool & Supply Co.

Sponsor Results: