Features:

• Pack of 2-1/2-inch by 16 gauge galvanized finish brad nails
• Galvanized for greater durability
• For use with select Hitachi, Paslode, Duofast, Porter Cable, Senco, Bostitch, and DeWalt nailers
• Packaged in box of 2,500

Editorial Review:

B & C Eagle, 2,500 Count, 2-1/2" Galvanized Straight Finish Nail, 16 Gauge, Fits The Following Nail Guns: Hitachi NT65A, NT65A2, NT65A3, NT65M, Paslode MU212, 3250GF16, Duofast LFN764, Porter Cable FN200, FN250A, FN250B, CFN250, Senco FP32, Bostitch Sb1664FN, FN16250K, Dewalt D51256k, DC612KA, DC616KA, Ridgid R250SFA, Milwaukee 7145-21.

Customer Reviews:

Avg. Customer Rating: 3.5 / 5.0

They're nails - not much to say:

I bought these along with a Porter Cable air nailer for some trim work in a remodel project. What can I say? They seem to hold well, and I haven't had a jam after nailing up a couple hundred feet of trim. The bad -- like most things "made in China."

Very Good Product !:

I have used over 10,000 of these nails in my Porter Cable FN250 nailer without a single problem. I have re-ordered and will continue to purchase. All in all a very good product.

Poor Quality Nails for the Porter-Cable Finish Nailer:

These nails are not of the quality necessary for the Porter-Cable Finish Nailer that they are typically advertised with (FN250A). They sometimes came out 2 at a time, not at all, or caused the nailer to jam. I called Porter-Cable, and acquired their nails, and the problems went away. I would not recommend these nails, especially for this nailer.

Similar Products:

B & C Eagle B16-112 1-1/2-Inch by 16 Gauge Galvanized Finish Brad Nail... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

Porter-Cable FN250B 3/4-Inch to 2-1/2-Inch 16-Gauge Finish Nailer from Porter-Cable (Tools & Hardware)

B & C Eagle B16-2 2-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500 per... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

B & C Eagle B16-134 1-3/4-Inch by 16 Gauge Galvanized Finish Brad Nail... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

Paslode Cordless 16 Gauge Straight Finish Nailer #902000 from Paslode (Tools & Hardware) - Usually ships in 24 hours

B & C Eagle B16-34 3/4-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

B & C Eagle B16-1 1-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500 per... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

B & C Eagle B16-114 1-1/4-Inch by 16 Gauge Galvanized Finish Brad Nail... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

Paslode Short Yellow Fuel Cell 4-Pack #650039 for the Paslode Cordless Trim... from Paslode (Tools & Hardware)

Also visit Main Street Tool & Supply Co.

Sponsor Results: