Features:

• Clamps materials up to 4" wide
• Quick-release design for faster set ups
• Cast iron body has mounting slots for easy installation
• Jaws are pre-drilled for auxiliary jaw plates

Editorial Review:

Includes 4" Quick-Release Drill Press Vise - 20-622.

Customer Reviews:

Avg. Customer Rating: 2.5 / 5.0

Call the Vise Squad:

Does it work? Pretty well, unless you are wanting to bolt it down to the drill press it was made for. While you can twist it around to get a few bolts in, that is a compromise you shouldn't have to make. Delta screwed up royally on this! I don't own another (yet) to recommend, but if you have a choice - pass on this one.

Nice little vise:

I looked at unbranded vises and their castings were rough and action was awful. This Delta branded vises is probably also made overseas but with Delta QC it is a nice little vise. The quick release is weighted and lets you push the jaw and snug it up with a half twist. I added a couple small hardwood jaw blocks held with #6 screws from behind and it is good to go.
The other commenters giving bad reviews for the mounting holes not lining up don't make sense to me. I leave it free floating on the drill... more info

Delta 4inch drill press:

This press is the worst. It does not fit the drill press it was designed for. The mounting holes do not line up.

hardware review:

Quick release is nice. BUT one of the two sides of the clamps is not vertical. If it was designed that way on purpose I don't know what's the advantage. Otherwise it's a manufacturing and QC problem. The unit is too heavy to be returned under warranty; most of the time it does not bother me.

Accessories:

[no image] Fine Woodworking (Magazine)

Woodworking Basics: Mastering the Essentials of Craftsmanship by Peter Korn (Paperback) - Usually ships in 24 hours

Similar Products:

Delta SM300 Shopmaster Bench 1/4 Horsepower 10-Inch Drill Press from Delta (Tools & Hardware)

DELTA DP300L 12-Inch TwinLaser Crosshair Drill Press from Delta (Tools & Hardware) - Usually ships in 24 hours

Milwaukee 48-89-1105 20 Piece 1/16-Inch to 1/2-Inch Titanium Coated Twist Drill... from Milwaukee (Tools & Hardware) - Usually ships in 24 hours

Delta 17-921 6-Inch Drill Press Vise Clamp from Delta (Tools & Hardware) - Usually ships in 24 hours

All in One Clamp A-50 50-Inch Grip Clamp Guide w/T-track from E. Emerson Tool Co (Tools & Hardware) - Usually ships in 24 hours

Bosch TS1003 Table Saw Left Side Support Extension from Bosch (Tools & Hardware) - Usually ships in 24 hours

Bosch TS1002 Table Saw Rear Outfeed Support Extension from Bosch (Tools & Hardware) - Usually ships in 24 hours

DELTA 17-950L 16.5-Inch TwinLaser Crosshair Drill Press from Delta (Tools & Hardware) - Usually ships in 24 hours

Delta 20-619 6-Inch Drill Press Vise from Delta (Tools & Hardware) - Usually ships in 24 hours

Also visit Main Street Tool & Supply Co.

Sponsor Results: