Features:

• Drives 18-guage brads from 5/8- to 2-1/8 inches
• Lightweight at 2.7 pounds for easy maneuvering and all-day work
• Onboard power adjustment increases the power by 30%
• Neverlube design means less maintenance and no oil stains

Editorial Review:

All pneumatic brad nailers are not created equal. The Senco FP25XP is among the better ones available. Backed by Senco's more than 50 years of experience in the business, the FP25XP is engineered and built to provide superior performance. An adjustable exhaust port keeps dust and debris away from the work surface, while the EZ-Clear jam release keeps you working without any long delays. The FP25XP is part of Senco's elite series of Xtreme Pro tools and features a built-in turbo setting that delivers 30 percent more power without asking more of the air compressor. Onboard tools and an adjustable depth of drive make adjustments a snap.--Carl Thress

Customer Reviews:

Avg. Customer Rating: 4.5 / 5.0

Performs Like A Champ!:

I received my Senco FP25XP 18-Gauge 5/8-Inch to 2-1/8-Inch Brad Nailer a few days ago and was waiting on purchasing a compressor. I purchased a Coleman ProForce 6gal for $75 from Menards. After reading the instructions for the FP25XP I checked all the settings, loaded it with 2" brads and began rapid firing into a 2x6. I went through two full magazines and every brad sunk perfectly - I was very impressed. I also attached a piece of door casing to the 2x6 with no problem. I then shot some brads in my... more info

oil free and works great.:

Works great and very light. Only thing is the nailer doesn't allow you adjust depth if you have the air pressure greater than 90psi. Like if your compressir is hooked up to other tools operating at higher pressure let's say 100 psi, than the senco gun will operate at still the high pressure

Poor Showing, strike two; just got a hit:

This is the second supposed pro series gun I've owned. The first started sticking between shots and wouldn,t countersink in hard woods. I'm a finnish carpenter by trade and while this gun preformed well for about 3 months. I had to keep it on turbo setting almost all the time at 110 pressure. So after returning that gun I got another, this would have been my 4th Senco gun. The second gun started having trouble sinking 2" in hardwoods and I started running it in turbo. In 6 months the second gun started... more info

13,000 brads and not a single jam!:

I have just finished installing about 2000 square feet of V-groove ceiling in my home and found the brad nailer to be perfect. After the initial adjustments at the air compressor everything worked perfectly without additional adjustments. The nailer fell nearly 24' off of the scaffolding I was working on and didn't even get a scratch. The rubber tip that protected the wood surface shows very little sign of wear. In my opinion it's worth every penny I paid for it!

Accessories:

B & C Eagle B18-134 1-3/4-Inch by 18 Gauge Galvanized Finish Brad Nail... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

Ladder Boss 90201 Pro Tool Bag from Hedges Ladder Boss (Tools & Hardware) - Usually ships in 24 hours

Porter-Cable AH11 3/8-Inch x 25 Vinyl Air Hose from Porter-Cable (Tools & Hardware)

Porter-Cable PAK253 17-Piece Accessory Kit from Porter-Cable (Tools & Hardware) - Usually ships in 24 hours

PUR-Hose PUR-38X100 3/8-Inch X 100 Polyurethane 250 PSI Air Hose from PUR-Hose (Tools & Hardware) - Usually ships in 24 hours

Similar Products:

Senco FinishPro 42XP 1-1/4-Inch to 2-1/2-Inch 15-Gauge Finish Nailer with Case from Senco (Tools & Hardware) - Usually ships in 24 hours

Senco FinishPro 10 1/2-Inch to 1-Inch 23-Gauge Micro Pinner from Senco (Tools & Hardware) - Usually ships in 24 hours

PUR-Hose PUR-14X050 1/4-Inch x 50 Polyurethane 250 PSI Air Hose from PUR-Hose (Tools & Hardware) - Usually ships in 24 hours

Bosch 1590EVSK 6.4 Amp Top Handle Jigsaw from Bosch (Tools & Hardware) - Usually ships in 24 hours

B & C Eagle B18-2 2-Inch by 18 Gauge Galvanized Finish Brad Nail (5,000 per... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner from Grex Power Tools (Tools & Hardware) - Usually ships in 24 hours

Senco SLS18 1W0002N 1/2-Inch to 1-1/2-Inch 18-Gauge Stapler from Senco (Tools & Hardware) - Usually ships in 24 hours

Bosch 1617EVSPK 12 Amp 2-1/4 Horsepower Plunge and Fixed Base Variable Speed... from Bosch (Tools & Hardware) - Usually ships in 24 hours

Campbell Hausfeld MP5200 25-Piece Accessory Kit with Case from Campbell Hausfeld (Tools & Hardware) - Usually ships in 24 hours

Also visit Main Street Tool & Supply Co.

Sponsor Results: