Features:

• 2-inch pneumatic flooring cleat nailer with 70-100 psi
• Use for installing 1/2- to 3/4-inch tongue and grove hardwood floors, drives 1-1/2-inch to 2-inch cleat nails
• Lightweight aluminum construction with non-marring base
• Includes mallet, air tool oil, wrenches, and 1/4-inch male plug

Editorial Review:

If installing hardwood floors is in your immediate future, the Porter-Cable FCN200 two-inch flooring cleat nailer is a smart tool to consider. The nailer is designed specifically for installing tongue-and-groove hardwood flooring with L-shaped flooring cleats and a thickness of 1/2 to 25/32 inch. The nailer works on 70-100 psi of compressed air and drives cleats with accuracy and force through even the toughest woods, but without damaging even the most delicate pre-finished floor. A 45 degree angled head saves time and frustration. A mallet is included to help position flooring strips prior to nailing them into place. And a rear-load, gravity-fed magazine makes cleat loading fast and easy (though some issues with the last few cleats in the clip have been reported). The tool is solid and stable. Heavy-duty, die-cast construction ensures quality. It also gives the tool a little bulk, but it's still relatively easy to use and well worth the effort.--Carl Thress

Customer Reviews:

Avg. Customer Rating: 5.0 / 5.0

Porter Cable FCN 200 Pneumatic vs. Porta Nailer Pneumatic:

I purchased and used the Porter Cable FCN200 Pneumatic Flooring Cleat Nailer and found it to be an excellent tool for the job. I also used the Pneumatic Porta Nailer. In comparison, I experienced no jams or miss fires with the Porter Cable but several with the Porta Nailer. While I prefer the nail design of the Porta Nails over those of the Porter Cable, I expect little or no problem with them holding the floor. They were, however, difficult to find and wound up using Bostitch 2" nails. The Porter Cable... more info

Very Satisfied:

I am very satisfied with this nailer. I laid about 450 square feet of 3/4" floor and had zero problems. Other reviews mentioned concerns with the last nail firing erratically...Several times I fired the last nail with no problem, other times, the last nail just dropped out before I had the chance to nail it. A carrying case would be nice, but, if you're not using it on a regular basis, it's just as easy to store it in the box it comes in. Overall, I am completely satisfied with the product and would... more info

Works flawlessly:

After laying 480 square feet of bamboo and about 250 square feet into a 900 sq ft oak project, this nailer hasn't had a single mistep. I've assisted in putting down hardwood before, but this is my first personal project. I'm not able to work straight through to completion (to many interuptions)so renting a nailer would have rapidly cost more than purchase. Nobody I talked to recommended a manual nailer, especially considering they aren't exactly cheap either. However, the prices on many of the recommended... more info

FCN 200 Floor Nailer:

I have purchased this nailer to install 3/4" Bruce hardwood in my house and have had a good experience with it. It will accept Stanley Bostich cleat nails which I found to be very convenient. The only problem I had was it wouldn't always drive the nails all the way in. After I turned the pressure up to about 85 pounds, I haven't had that problem since. If you do run into this problem, the best way to remove the nail is to grab it with plyers and swist it back and forth until it breaks off. I would recommend... more info

Accessories:

Custom LeatherCraft G361 Professional Ultra-Flex Gel Kneepads from Custom Leathercraft (Tools & Hardware) - Usually ships in 24 hours

Bostitch FLN200 2-Inch Flooring L-Nail (1,000 per Box) from Bostitch (Tools & Hardware) - Usually ships in 24 hours

Custom LeatherCraft 361 Ultraflex Non-Skid Professional Kneepads from Custom Leathercraft (Tools & Hardware) - Usually ships in 24 hours

Strait-Line 65201 2.5lb Blue Chalk from IRWIN (Tools & Hardware)

Porter-Cable PAK253 17-Piece Accessory Kit from Porter-Cable (Tools & Hardware) - Usually ships in 24 hours

Similar Products:

Bostitch FLN200 2-Inch Flooring L-Nail (1,000 per Box) from Bostitch (Tools & Hardware) - Usually ships in 24 hours

Porta-Nail Flooring Nail/Staple Setting Tool from Porta-Nails (Tools & Hardware) - Usually ships in 24 hours

Porter-Cable H5041 FLC200 2" Cleat Nails from Porter-Cable (Misc.)

Hardwood Floors: Laying, Sanding and Finishing by Don Bollinger (Paperback) - Usually ships in 24 hours

Bostitch FLN150 1-1/2-Inch Flooring L-Nails (1,000 per Box) from Bostitch (Tools & Hardware) - Usually ships in 24 hours

Cepco Tool QuikJack QJ1 Flooring / Construction Jack from Cepco Tool (Tools & Hardware) - Usually ships in 24 hours

GoodYear 045 3/8-Inch x 50 Safety Yellow Rubber Hose 3/8 -Inch by 50-Feet 250... from GoodYear (Tools & Hardware) - Usually ships in 24 hours

Bessey SVH400XL SVH Flooring and Clamping System from Bessey (Tools & Hardware) - Usually ships in 24 hours

Porter-Cable CFNBNS Three Nailer and Compressor Combo Kit from Porter Cable (Tools & Hardware) - Usually ships in 24 hours

Also visit Main Street Tool & Supply Co.

Sponsor Results: