Features:

• 1-1/4-inch to 2-1/2-inch 15-gauge angled finish nailer kit; dual load "lock and load" or "load and lock" magazine
• 5-position vertical slide; swept back contact trip with low-profile no-mar pad; tool-free jam clearing
• Lightweight magnesium frame
• Includes carrying case, lubrication, and safety glasses

Customer Reviews:

Avg. Customer Rating: 4.0 / 5.0

Great Tool:

This nailer has worked very well for me. It is very light weight. The depth control is very easy to use. I use Senco nails with virtually no problems.

contractor grade:

I'm a contractor and use this gun everyday for everything from exterior trim in New England temperature extremes (many days in single digits)to interior trim and hardwood flooring. Thousands of nails fired, including stainless all sizes without jamming. Oil the gun daily and use 34 degree nails, you won't be dissapointed. Belt hook is good too, especially on pump jacks and wall brackets doing trim.

nice gun with the right nails:

This gun started out bad for me, first I was using nails left over from my old Senco sfn2 gun. Turns out they are 14ga. Nails and are a little too tight for the 15ga Dewalt. They worked but had a lot of sticking. So I went to my local lumberyard a bought some generic 15ga nails. The new problem was the gun that held the nails together colleted in the nose of the gun and jammed things up. Out for a new box of senco 15ga nails and things work like a charm. But it was touch and go for a while with this gun,... more info

Good gun, limited nail sizes:

This nail gun has been flawless. The nails are easy to load, and visible when loaded so easy the check size and qty. (No shooting blanks with this gun)
The only issues I have had with it are, limited selection of nails for it in the big Orange Store. And then using it for small trim when my Sears Brand 18 guage finish nailer wore out. This means now I need to upgrade and get the dewalt 18 gauge. I will aslo need to get a framming gun as well since this is not big enough to fasten 2X's.

Accessories:

DeWALT Men's Equalizer Composite Toe Hiker from DeWALT

B & C Eagle DA17G 1-1/2-Inch by 15 Gauge by 33 Degree to 35 Degree... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

B & C Eagle DA19G 1-3/4-Inch by 15 Gauge by 33 Degree to 35 Degree... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

B & C Eagle DA25G 2-1/2-Inch by 15 Gauge by 33 Degree to 35 Degree... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

B & C Eagle DA17SS 1-1/2-Inch by 15 Gauge by 33 Degree to 35 Degree Wire... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

Similar Products:

Senco A302500 15-Gauge x 2-1/2 Inch Bright Basic Finish Nail from Senco (Tools & Hardware) - Usually ships in 24 hours

DEWALT D51238K 5/8-Inch to 2-Inch 18-Gauge Brad Nailer from DEWALT (Tools & Hardware) - Usually ships in 24 hours

Senco A301500 15-Gauge by 1-1/2 Inch Electro Galvanized Finish Nails from Senco (Tools & Hardware) - Usually ships in 24 hours

Senco A302000 15-Gauge by 2-Inch Bright Basic Finish Nail from Senco (Tools & Hardware) - Usually ships in 24 hours

GoodYear 045 3/8-Inch x 50 Safety Yellow Rubber Hose 3/8 -Inch by 50-Feet 250... from GoodYear (Tools & Hardware) - Usually ships in 24 hours

Senco A302009 15-Gauge x 2-Inch Electro Galvanized Finish Nail from Senco (Tools & Hardware) - Usually ships in 24 hours

DEWALT DW723 Miter Saw Stand from DEWALT (Tools & Hardware) - Usually ships in 24 hours

Senco A302509 15 Gauge x 2-1/2 Inch Electro Galvanized Finish Nail from Senco (Tools & Hardware) - Usually ships in 24 hours

Campbell Hausfeld MP5200 25-Piece Accessory Kit with Case from Campbell Hausfeld (Tools & Hardware) - Usually ships in 24 hours

Also visit Main Street Tool & Supply Co.

Sponsor Results: