Home / Tools / Powermatic 1791227K Model 64 Artisan 10-Inch Left Tilt 1-1/2 Horsepower Contractor Saw with 30-Inch Accu-Fence and 2 Cast Iron Extension Wings, 115/230-Volt 1 Phase
Perfect for the contractor, craftsman, or home hobbyist
1-1/2-horsepower, single-phase, 115/230-volt motor
30-inch Accu-Fence system delivers excellent results
Blade tilts left for easier bevel cutting
Editorial Review:
Arbor Diameter (in.) 5/8 Arbor Speed (RPM) 4500 Blade Diameter (in.) 10 Brand Powermatic Distance Between Sliding Table and Blade (in.) n.a. Dust Collection Adapter Port n.a. Dust Port Diameter (OD/in.) 4 Height 34 inch Leg Stand with Steel Storage n.a. Length 50 inch Maximum Cross Cut (in.) n.a. Maximum Depth of Cut (in.) 3-1/8 Maximum Depth of Cut at 45 Degrees (in.) 2-1/8 Maximum Diameter of Dado (in.) 7-1/2 Maximum Rip Left of Blade (in.) 12 Maximum Rip Right of Blade (in.) 30 Maximum Width of Dado (in.) 1 Miter Gauge Type T-slot with stops Model Number 64A Motor HP 1-1/2HP Motor Phase 1PH Motor Voltage 115/230V Net Weight 343 pound Part Number 1791227K Prewired 115V Rapid Wing Extension n.a. Ship Weight 370 pound Table Height (in.) 35 Table Size with Standard Extension (L x W/in.) 40 x 27 Table Size without Extension (L x W/in.) 20 x 27 Table Size without Wings (L x W/in.) 20 x 27 Table Type cast iron Width 32 inch Part # Description 2042367 2042370 2195076K Accu-Fence System, 30" 6441000Z Leg Assembly (Set of 2) 6682004 Rout-R-Lift for Model 66 6827029 Table, 50" Accu-Fence System, 27" X 35-5/8" 6827033 27" x 36" Rout-R-Lift Table for 64A TA Saw 6827034 708295 JTG-10Q, Tenoning Jig with Quick Release 708818 TPS-1, Push Stick 709380 NCI-10, No Clearance Insert for 10" Tablesaw 709721 FB-1, Featherboard Click Here for Promo Details WARRANTY AND SERVICE WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
This saw lives up to Powermatic's reputation for rugged construction and unrivaled performance. The cast-iron tabletop and its two wings are ground to a mirror-like finish with amazing accuracy in flatness. One thing we've always liked about Powermatic's saws is the left-tilting arbor. Tilting the blade to the left--away from the fence--eliminates the need for a sacrificial fence and reduces the risk of the piece binding under the blade. This package includes a 30-inch Accu-Fence, famous for its precision and ease of use, making each job go faster. This fence length is perfect for the home shop where space is an issue and big projects are less common. An interior spring applies constant pressure when not locked down, which takes the slop out of fence movement, improving speed and accuracy. It also has replaceable sides with easy-access screws. Users can adjust the sides so close to the tabletop that laminates will not slip underneath. Initial setup should go faster now that Powermatic has made it easier to align the fence rails parallel to the tabletop. Another advantage is the longer bar of the T-slot miter gauge, which allows users to crosscut wider stock. Overall, Powermatic table saws are top quality and built to the tightest tolerances in the industry. --Nancy Gleason
Customer Reviews:
Avg. Customer Rating: 4.0 / 5.0
An Overrated Brand:
This is a good, relatively inexpensive cast iron table saw. And that is all that it is. The AMZN review by Nancy Gleason is misleading. Left tilt saws are better, but they are ubiquitous. Read the reviews. They are quite accurate and touch on many important aspects. It is curious that many reviewers make significant criticisms while indicating a very high rating. It is not unusual that this saw's top is not level, the splitter is difficult to adjust, the belt guard is infamous (and has been so for... more info
Solid machine:
This is the second powermatic tablesaw I have had the oppurtunity to work with. Assembly was easy, took about 4-5 hours. I had to take some time to get the motor alignment correct, but once everything was done properly it purrrs like a kitten. The accuaracy is great, very solid machine for many years of service. The one and only knock I can think of is the motor alignment. When first asembled I had alot of vibration. After looking closely the belt had rubbed on the guard screws and took a chunk out of it.... more info
Gold Standard for 750$?:
Easy to assemble even for a novice. Took about 4 hours with the help of my Wife. Couple of gripes on set up is the guard for the drive belt. Your drive pulleys must be precisely aligned for it not to rub badly. Also, the blade guard/splitter combo anti kickback mechansims mar the item being cut. The guard splitter is also very bulky and akward to adjust, at least for me. Blade adjustment was neglible due to it being dead on out of the box. The fence system is excellent, just make sure you align it... more info
Just got most of it:
I just received most of the saw, the fence rail is missing, it's on the way. I assembled the saw lined everything up, but it vibrates. I don't know how this thing can pass a nickel test. I lined the pulleys up with a 32 inch level so they are pretty dead on. I notice the motor shakes a bit on start up and shut down, does this change if I wire it for 230? Any other helpful hints on getting it to stop shaking will be helpful.
