Jorgensen 3724-HD 24-Inch Heavy-Duty Steel Bar Clamp

 

Jorgensen 3724-HD 24-Inch Heavy-Duty Steel Bar Clamp

Availability: Usually ships in 24 hours

$12.99




Features:

  • Steel bar clamp designed for heavy-duty projects
  • 2 clamp pads protect work pieces from damage
  • Internal tooth washers provide extra stay-on power
  • Pressed and riveted fixed head adds clamping power


Editorial Review:

24", Jorgensen Heavy Duty Steel Bar Clamp.

The Jorgensen 24-Inch Heavy-Duty Steel Bar Clamp has a 24-inch opening and 3-inch reach for your heavy-duty projects. Two clamp pads protect your work from damage, and the fixed head is pressed and riveted to help keep material in place. Steel internal tooth washers measuring 1-3/16 inches in diameter give the swivel more stay-on power, while the castings use hardened steel thrust bearings and malleable ductile iron castings for extra strength. High-carbon steel gives the plated bars added staying power, and the large maple handles keep your hands fresh. This clamp is backed by a 1-year limited warranty.

Customer Reviews:

Avg. Customer Rating: 4.0 / 5.0

Stain the wood:

The rubber on these clamps is very soft. When clamping it leaves a stain on the wood that will not come off without a lot of sanding/scraping/planing. They work fine and are pretty heavy duty but the marks that are left remain after finishing if only a clear coat or light stain is used. I have a lot of these clamps (and the 12" and 36") I bought for a large project. The price was fine but now I am looking for other pads to change out with these. If you find the price is great then buy them and get new pads.

These clamps leave oily stains on your work.:

A word of caution about these clamps. The pads on the jaws of these clamps is made of an oily plastic that makes oily marks on the wood.
Cleaning the pads with solvent doesn't help and getting the oil off the wood is difficult/impossible.
I've contacted the manufacturer and they are aware of the problem. They recommend going over the oily marks with solvent two or three times. Then, they recommend that you apply wood stain to the project.
To read more Amazon reviews about this problem,... more info

A matter of preference:

I believe the HD Jorgensens are the best bar clamps available. Bessey's tradesman are good, but can be a little inconsistant on the quality control end & a little too expensive. Record's are good too but very expensive. I prefer the Jorgensen's clutch, it holds better. You can snug the clamp up tight enough to hold the work yet still make adjustments just by pushing it together, an excellent feature. Jorgensen's pads are top notch, they're thick & soft & truly protect the work. The Jorgensen... more info

Very Good Clamps:

Good clamps. Not Bessey, next best thing and cheaper. 4 stars only cause their wooden handles look like they were made in Iraq.


Accessories:

Gorilla Glue Adhesive, 8-Ounces #50008 Gorilla Glue Adhesive, 8-Ounces #50008
from Gorilla Glue
(Tools & Hardware)
- Usually ships in 24 hours
Franklin International Titebond II Premium Wood Glue, 16-Ounces #5004 Franklin International Titebond II Premium Wood Glue, 16-Ounces #5004
from Franklin International
(Tools & Hardware)


Similar Products:

Jorgensen 3736-HD 36 Heavy-Duty Steel Bar Clamp Jorgensen 3736-HD 36 Heavy-Duty Steel Bar Clamp
from Jorgensen
(Tools & Hardware)
- Usually ships in 2 to 4 weeks
Jorgensen 3712-HD 12-Inch Heavy-Duty Steel Bar Clamp Jorgensen 3712-HD 12-Inch Heavy-Duty Steel Bar Clamp
from Jorgensen
(Tools & Hardware)
- Usually ships in 24 hours
Jorgensen 3718-HD 18-Inch Heavy-Duty Steel Bar Clamp Jorgensen 3718-HD 18-Inch Heavy-Duty Steel Bar Clamp
from Jorgensen
(Tools & Hardware)
- Usually ships in 24 hours
Jorgensen 3706-HD 6-Inch Heavy-Duty Steel Bar Clamp Jorgensen 3706-HD 6-Inch Heavy-Duty Steel Bar Clamp
from Jorgensen
(Tools & Hardware)
- Usually ships in 24 hours
Jorgensen 50 Pony 3 4-Inch Pipe Clamp Fixture Jorgensen 50 Pony 3/4-Inch Pipe Clamp Fixture
from Pony
(Tools & Hardware)
- Usually ships in 24 hours
Jorgensen 3730-HD 30 Heavy-Duty Steel Bar Clamp Jorgensen 3730-HD 30 Heavy-Duty Steel Bar Clamp
from Jorgensen
(Tools & Hardware)
- Usually ships in 24 hours
Kreg K3MS K3 Master Pocket Hole Jig System Kreg K3MS K3 Master Pocket Hole Jig System
from Kreg
(Tools & Hardware)
- Usually ships in 24 hours
Kreg DDS 3-Inch #2 Square Driver Bit and 6-Inch #2 Square Driver Bit for Kreg Pocket Hole Systems Kreg DDS 3-Inch #2 Square Driver Bit and 6-Inch #2 Square Driver Bit for Kreg...
from Kreg
(Tools & Hardware)
- Usually ships in 24 hours
AO Safety Woodworker s Respirator #95190 AO Safety Woodworker's Respirator #95190
from AO Safety
(Tools & Hardware)
- Usually ships in 24 hours
Portions © Amazon.com, Inc.

Also visit Main Street Tool & Supply Co.



Sponsor Results:

Work Boots at the lowest prices guaranteed at BootBay! click here
BootBay - Guaranteed Lowest Prices! click here
Free Shipping on BootBay! - click here