Features:

• 36" opening with 3" reach
• Two clamp pads standard with clamp
• Larger clamping surface than the competition
• Fixed head is pressed and riveted

Editorial Review:

36", Jorgensen Heavy Duty Steel Bar Clamp.

Customer Reviews:

Avg. Customer Rating: 4.0 / 5.0

Pads stain wood:

The rubber on these clamps is very soft. When clamping it leaves a stain on the wood that will not come off without a lot of sanding/scraping/planing. They work fine and are pretty heavy duty but the marks that are left remain after finishing if only a clear coat or light stain is used. I have a lot of these clamps I bought for a large project. The price was fine but now I am looking for other pads to change out with these. If you find the price is great then buy them and get new pads.

solid clamp:

I just received this clamp and have not had a chance to use it yet,however if it clamps anything like it feels it should be great.As an amatuer woodworker, I own several other smaller clamps and some 'pipe' clamps. This clamp is much heavier than I had expected the screw is solid and about 1/2 or 5/8 in diamater definitly stronger than expected it also come with plastic caps on the faces to prevent scratching the work. Well, I have some drawers to glue...

Accessories:

Gorilla Glue Adhesive, 8-Ounces #50008 from Gorilla Glue (Tools & Hardware) - Usually ships in 24 hours

Franklin International Titebond II Premium Wood Glue, 16-Ounces #5004 from Franklin International (Tools & Hardware)

Similar Products:

Jorgensen 3724-HD 24-Inch Heavy-Duty Steel Bar Clamp from Jorgensen (Tools & Hardware) - Usually ships in 24 hours

Jorgensen 3712-HD 12-Inch Heavy-Duty Steel Bar Clamp from Jorgensen (Tools & Hardware) - Usually ships in 24 hours

Jorgensen 3718-HD 18-Inch Heavy-Duty Steel Bar Clamp from Jorgensen (Tools & Hardware) - Usually ships in 24 hours

Jorgensen 3706-HD 6-Inch Heavy-Duty Steel Bar Clamp from Jorgensen (Tools & Hardware) - Usually ships in 24 hours

Jorgensen 50 Pony 3/4-Inch Pipe Clamp Fixture from Pony (Tools & Hardware) - Usually ships in 24 hours

Jorgensen 3730-HD 30 Heavy-Duty Steel Bar Clamp from Jorgensen (Tools & Hardware) - Usually ships in 24 hours

Jorgensen 3724A 24 Steel Bar Clamp from Jorgensen (Tools & Hardware)

Kreg K3MS K3 Master Pocket Hole Jig System from Kreg (Tools & Hardware) - Usually ships in 24 hours

AO Safety Replacement Filters for Woodworker's Respirator, 4-Pack #95191 from AO Safety (Tools & Hardware) - Usually ships in 24 hours

Also visit Main Street Tool & Supply Co.

Sponsor Results: