Features:

• Powerful finish stapler that drives 18-gauge 1/4-inch crown staple from 1/2- to 1-1/2-inch
• Adjustable depth of drive
• Full, soft grip for comfort and control
• Includes case, fittings, repair tools, and oil

Editorial Review:

SLS 18, 18 Gauge 1-1/2" Stapler, 1/4" Crown, Finish Stapler Uses 1/2"-1-1/2" 18 Gauge Staples, Applications Include: Assembling Drawers, Cabinet Frame Assembly, Upholstery Sponge Attachment, Underlayment Sheathing, Molding/Trim, Prefinished Gypsum, Vinyl & Aluminum Siding, General Woodworking, Lattice Work, Bed Spring Attachment, Casebacks, Paneling, Soffits.

The versatile SLS 18-gauge finish stapler from Senco weighs just 2.9 pounds, but it can drive 1/2- to 1-1/2-inch staples into hard woods with ease. With either a dual or restrictive trigger, you can choose between high productivity or precision placement -- which makes it the ideal stapler for a wide range of applications. Use it to assemble drawers and cabinet frames, tackle upholstery work, handle underlayment sheathing and molding/trim, apply vinyl and aluminum siding, perform general woodworking tasks and much more.

Customer Reviews:

Avg. Customer Rating: 4.5 / 5.0

Not bad!:

I have used this stapler for about a year and so far so good. Its got plenty of power and hasn't jammed once. Of course it doesn't get used everyday on my jobs but it works when it does get used. I only have two gripes, one is the foam padding that wore off after two uses and second, the safty is hard to get used to because the gun has to be held perfectly to the material but its still a sound gun!

Could be better...:

I used this stapler quite a lot since if first got it and would recommend it for the price, but my only complaint that kept it from getting five starts would be that every now and then it misfires and just marks up the wood - happens the most with 1 1/2" staples but has never happened with 3/4" staples, I was using Senco staples too, but no jams though. Overall a good gun, nice case and good depth adjustment and consistency even in thin delicate material.

Works flawlessly:

I use this stapler almost exclusively to install plywood backs (typically 1/4" to 3/8" thick) on cabinet carcasses which are almost always 3/4" plywood. I have not had a jam or other problem in over two months of use. One nice feature is an integral 3/8" spacer on the nosepiece which allows me to very easily center the staple in 3/4" material. Nice little touch. I would recommend.

Great Stapler:

I purchased the SLS 18 stapler to secure luan underlayment in my kitchen/breakfast room. I shot over 5000 staples without any jamming, double fires, etc. In short, the stapler worked perfectly. In addition, the soft feel of the hand grip is very comfortable, although it is already showing signs of wear.

Accessories:

B & C Eagle 9018 3/4-Inch by 18 Gauge Narrow Crown Galvanized Finish Staple... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

B & C Eagle 9022A 7/8-Inch by 18 Gauge Narrow Crown Galvanized Finish Staple... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

Porter-Cable PAK253 17-Piece Accessory Kit from Porter-Cable (Tools & Hardware) - Usually ships in 24 hours

PUR-Hose PUR-14X100 1/4-Inch x 100 Polyurethane 250PSI Air Hose from PUR-Hose (Tools & Hardware) - Usually ships in 24 hours

PUR-Hose PUR-14X050 1/4-Inch x 50 Polyurethane 250 PSI Air Hose from PUR-Hose (Tools & Hardware) - Usually ships in 24 hours

Similar Products:

B & C Eagle 9018 3/4-Inch by 18 Gauge Narrow Crown Galvanized Finish Staple... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

B & C Eagle 9038A 1-1/2-Inch by 18 Gauge Narrow Crown Galvanized Finish... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

B & C Eagle 9025A 1-Inch by 18 Gauge Narrow Crown Galvanized Finish Staple... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

Bosch 1590EVSK 6.4 Amp Top Handle Jigsaw from Bosch (Tools & Hardware) - Usually ships in 24 hours

Senco FP25XP 18-Gauge 5/8-Inch to 2-1/8-Inch Brad Nailer from Senco (Tools & Hardware)

Senco FinishPro 42XP 1-1/4-Inch to 2-1/2-Inch 15-Gauge Finish Nailer with Case from Senco (Tools & Hardware) - Usually ships in 24 hours

Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner from Grex Power Tools (Tools & Hardware) - Usually ships in 24 hours

B & C Eagle 9032 1-1/4-Inch by 18 Gauge Narrow Crown Galvanized Finish... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

Fein 63502151020 1-1/8-Inch Universal E-Cut Blade, 3 Pack from Fein (Tools & Hardware) - Usually ships in 24 hours

Also visit Main Street Tool & Supply Co.

Sponsor Results: