Universal/deluxe tenoning jig; handles up to 3-1/4-inch thick stock; fits saws with 3/8 by 3/4-inch miter slot
Adjustable from 45 to 90 degrees; fits left- and right-tilting table saws; large crank handles
Cast-iron construction
Includes one tenoning jig
Editorial Review:
Includes Universal Tenoning Jig - 34-184.
Sure, you could spend a day in your shop building your own tenoning jig. Or you could spend the day making furniture with this one. Your choice. We know what we'd choose, that's for sure. Delta's universal jig fits any table saw that has a 3/8-by-3/4-inch miter slot and adapts to right- or left-tilting arbors. You'll get top-quality craftsmanship with the microfine-thread adjustment knob, allowing you to adjust width-of-cut settings to a hair for the snuggest possible tenon fit. We particularly like Delta's redesign of the handle. Most tenoning jigs we've used have one handle, sometimes up too high to offer good control. But Delta's replaced that with two, positioned at the jig's base, just where we always thought they ought to be. Another good innovation is the thumbscrew that lets you quick-release the hold-down clamp support. As for accuracy, it's hard to do better than this. --Kris Jensen-Van Heste
Customer Reviews:
Avg. Customer Rating: 3.0 / 5.0
Tendoning Jig doesn't Fit Table Saw!:
The tendoning jig doesn't fit my Craftsman table saw!! I have written the seller, Temberline, numerious times. I was finally told to grind the washers off that are located at the end of the guide. This will void any warranty. I have asked for other solutions several more times and have not received a reply. Now I have been requesting a return authorization, and still with no reply.
This seems to be a great tool but is usless to me without a proper solution to fitting it to my table saw.
I have... more info
Delta 34-184 Universal-Deluxe Tenoning Jig:
The Delta 34-184 Universal-Deluxe Tenoning Jig didn't fit my Table saw. They shipped very qickly and was satisfied with the service. However the jig didn't fit.
Great tool!:
This has been reviewed as the best Tenoning jig and this source was at least $20 below other market costs and was delivered quickly and in perfect shape!
Great tool, be prepared to tune it.:
As most will attest, the tool comes set for a right tilt saw. This seems strange since most saws are now left tilt. This operation requires you to remove the guide and adjuster and relocate the guide to another set of pre-drilled holes. When I re-assembled the tool, I could not square it to the table. The holes were drilled out of allignment in the base! It is beyond me how that happens. If the tool is built using a CNC machine, it should be impossible. Delta must be using low skilled laborers to manually... more info
