Features:

• 1 hp motor for fast stock removal
• 4-inch dust port for easy collection
• Large hand wheel for easy adjustment
• 20 inches wide capacity for sanding larger surfaces

Editorial Review:

Includes 10-20 Plus Bench Top Drum Sander - 628900, 80-Grit Abrasive Strip, 100-Grit Abrasive Belt, TufTool®.

Customer Reviews:

Avg. Customer Rating: 3.5 / 5.0

Very Nice Machine:

I purchased this about a month ago and have use it a little. So far it has performed very well. Like another reviewer said, out of the box there is almost no assembly required(just some heavy lifting to get it out of the box). The precut sandpaper goes on easily as there are no tools required. I have had no problems with the belt tracking as of this time. The machine seems to have plenty of power as long as you don't try to remove too much material in one pass. All in all, I am really glad I bought this... more info

Does the job but is really touchy:

After reading all the reviews, both plus and minus, I bought it. It does the job but is really touchy. As others have said, it does kick off a lot, especially if the sanding dust builds up on the drum (caused in my case by not having a stronger dust collector). The belt also wonders from side to side. I have used it for over six months and it still wonders. Not a big problem but something you have to watch. I put a piece of masking tape on each side of the belt with a arrow. When the belt wonders past the... more info

Jet Drum Sander:

After reading other reviews I was a bit reluctant to order this sander. They weren't very positive. The main complaint was the tracking of the feed belt. I did have to dial the unit in when first set up but after that I have continually made very minor adjustments as I was sanding to keep everything running smooth.
I make guitars so I use the Jet to thickness my tone woods. I can take the measurement down to under one eigth inch with no problem at all. Just a fantastic and very even finish. I'm... more info

Just Okay:

I had a Performax 16-32 but had to downsize due to a recent move. This Jet 10-20 (They didn't send a Performax) is not the same quality as the Performax was, IMHO. The manual says that all adjustments were made at the factory but I had to adjust the tracking, conveyor belt tension, and roller position. The manual says that the trackers should be installed but they were already on the machine that I got. There are worn sections along the sides of the tracking belt which causes me to wonder if this machine is... more info

Accessories:

Performax 60-1150 Ready to Wrap Abrasive Strips for Performax 10-20 Plus Drum... from WMH Tool Group (Tools & Hardware)

Performax 60-1060 Ready to Wrap Abrasive Strips for Performax 10-20 Plus Drum... from WMH Tool Group (Tools & Hardware) - Usually ships in 24 hours

Performax 60-1080 Ready to Wrap Abrasive Strips for Performax 10-20 Plus Drum... from WMH Tool Group (Tools & Hardware) - Usually ships in 24 hours

Performax 60-1100 Ready to Wrap Abrasive Strips for Performax 10-20 Plus Drum... from WMH Tool Group (Tools & Hardware) - Usually ships in 24 hours

Performax 60-1180 Ready to Wrap Abrasive Strips for Performax 10-20 Plus Drum... from WMH Tool Group (Tools & Hardware) - Usually ships in 24 hours

Similar Products:

Performax 60-1120 120-Grit Abrasive Strips for Performax 10-20 Plus Drum Sander,... from WMH Tool Group (Tools & Hardware) - Usually ships in 24 hours

Performax 60-1080 Ready to Wrap Abrasive Strips for Performax 10-20 Plus Drum... from WMH Tool Group (Tools & Hardware) - Usually ships in 24 hours

Performax 60-1180 Ready to Wrap Abrasive Strips for Performax 10-20 Plus Drum... from WMH Tool Group (Tools & Hardware) - Usually ships in 24 hours

Performax 60-1060 Ready to Wrap Abrasive Strips for Performax 10-20 Plus Drum... from WMH Tool Group (Tools & Hardware) - Usually ships in 24 hours

Jet JW1044 4-Inch to 2-1/2-Inch Reducer from JET (Tools & Hardware) - Usually ships in 24 hours

[no image] Performax 608005 Infeed/Outfeed Table for 10-20 Plus Sander from WMH Tool Group (Tools & Hardware) - Usually ships in 24 hours

JET 60-2220 Ready to Wrap Abrasive Strips for Performax 10-20 Plus Drum Sander... from WMH Tool Group (Tools & Hardware) - Usually ships in 24 hours

Performax 60-1100 Ready to Wrap Abrasive Strips for Performax 10-20 Plus Drum... from WMH Tool Group (Tools & Hardware) - Usually ships in 24 hours

[no image] JET 638004 Open Stand With Shelf for 10-20 & 16-32 from Performax (Tools & Hardware) - Usually ships in 24 hours

Also visit Main Street Tool & Supply Co.

Sponsor Results: