Powermatic 1791296 Model 209 20-Inch 5 Horsepower Planer, 230-Volt 1 Phase

 

Powermatic 1791296 Model 209 20-Inch 5 Horsepower Planer, 230-Volt 1 Phase

Availability: Usually ships in 2 to 3 days

$2,399.99




Features:

  • Powerful 5 horsepower Motor 1ph 230 Volt; 770 pounds
  • 20-inch planing capacity; 5-inch dust port connects to any dust collector
  • 2-speed oil bath gearbox transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM
  • Huge 55-1/2- by 20-inch cast iron table; intergrated casters for mobility


Editorial Review:

Includes 209 20" Planer - 1791296, Singled-Sided Knives, Knife Setting Gauge.

This big beauty turns out some of the smoothest surfaces we've ever seen, but since it's coming from Powermatic, it's really no surprise. The 5 horsepower motor powers along a four-knife cutterhead at 5,000 rpm, producing 20,000 cuts per minute, and the results are outstanding.

This planer's capacity is just intense, taking in boards as wide as 20 inches with a max thickness of 8 inches - and its capacity for minimum length is surprisingly small, at 6-3/4 inches. Knife adjustment or removal will require a little patience, but it's not a chore that will have to be done with any frequency.

This planer comes with two feed speeds of 24 and 31 feet per minute, but the gear box is easily converted to four speeds with the included parts - just replace the lower gear shaft sprocket and chain to have access to speeds of 16.2 and 20.7 feet per minute. When you're running a heavy load, the planer automatically slows the feed rollers, so you get the very best planing every time.

Powermatic even makes life easier for you when you're not actually planing - by putting two heavy-duty return rollers on top of the machine to help you get heavy boards back to the infeed side. The tables on both ends are smooth-as-glass cast iron and give you great stock support.

The fully enclosed cabinet is solid as a rock and features a 5-inch dust port to hook up to your dust collection system. You'll really need to be moving at least 900 cubic feet per minute for the dust extraction to be effective. Take care not to install the dust port if you're not hooking into a collection system, though, because the abundant sawdust will clog your machine in no time.

Since belts tend to stretch, you'll probably find you have to tighten the belt the first few times you use the planer. It's an easy process that involves taking off the guard and rear panel, loosening the nuts on the motor adjustment screws and turning the top nuts to lower the motor plate. Tighten back up and it's done. Aside from that, with attentive lubrication, this beauty will last you for decades.--Kris Jensen-Van Heste

Customer Reviews:

Avg. Customer Rating: 4.0 / 5.0

Buy the Byrd helical cutterhead:

I am writing this review to tell you not to buy this planer without getting the helical carbide Byrd cutterhead. Apparently Amazon doesn't sell it with this option, but do not let that sway your decision. This is a fine machine, and plenty powerful. The Byrd cutterhead reduces the noise by half. Seriously, half. Even while you are planing... the noise reduction is unbelievable. It also produces a vastly superior planed surface. No more clogging of the dust collection by long, stringy maple. Just fast, quiet... more info

great machine:

This tool has lived up to every expectation. The powermatic tech support is great. I would suggest using the e-mail support for any warranty claims as the phone line seems to be very busy. The planer arrived in perfect condition in a very sturdy crate. It was in good adjustment. I have made some minor adjustments to the bed rollers. It was very easy to do. I haven't adusted or replaced the knives yet. If you can afford it definetly go for the shelix cutterhead. The dust collection hood isn't set up for flex... more info

Excellent !!!:

Every thing went great, the delivery was very fast. The machine works great !! Thanks !!

professional woodworker:

After reading a few reviews here, I can understand some of the dissapointments.
We received our planer in good condition and did need to fine tune some of the settings. We consider this fairly normal however. The one problem we experienced out the gate though was that a chip deflector broke from it's weld and fell into the knife head. Since we purchase this unit from a large dealership, Powermatic shipped all the needed replacement parts immediately. Unfortunately, our several hours of labor required... more info


Accessories:

Jet JWP-15HO-K 708807 Set of Knives Jet JWP-15HO-K / 708807 Set of Knives
from JET
(Tools & Hardware)
- Usually ships in 24 hours
Jet JDC-13 708361 Planer Dust Hood Attachment Jet JDC-13 / 708361 Planer Dust Hood Attachment
from JET
(Tools & Hardware)
- Usually ships in 24 hours
[no image] Wilton 34463 Double Edged Planer Blades (2 per set)
from WMH Tool Group
(Tools & Hardware)
- Usually ships in 24 hours
Jet 708115 4-pc Swivel Caster Set for Machine Base Jet 708115 4-pc Swivel Caster Set for Machine Base
from WMH Tool Group
(Tools & Hardware)
Jet 350090 6-Inch Riser Block Jet 350090 6-Inch Riser Block
from WMH Tool Group
(Tools & Hardware)
- Usually ships in 24 hours
 


Similar Products:

Powermatic 6292621 20-Inch Replacement Knives Powermatic 6292621 20-Inch Replacement Knives
from Powermatic
(Tools & Hardware)
- Usually ships in 24 hours
Jorgensen 50 Pony 3 4-Inch Pipe Clamp Fixture Jorgensen 50 Pony 3/4-Inch Pipe Clamp Fixture
from Pony
(Tools & Hardware)
- Usually ships in 24 hours
Portions © Amazon.com, Inc.

Also visit Main Street Tool & Supply Co.



Sponsor Results:

Work Boots at the lowest prices guaranteed at BootBay! click here
BootBay - Guaranteed Lowest Prices! click here
Free Shipping on BootBay! - click here