Sturdy cast iron construction for optimal stability and durability
Quick position table mounted swiveling vise clamp for angled work pieces
Feed lever features six positions for quick adjustments
Table and fence tilt from 0 to 35 degrees for a wide variety of applications
Editorial Review:
Amps n.a. Base Overall Height (in.) 60 Base Size (in.) 14 x 16 Brand Powermatic Bushing Size (in.) 5/8, 3/4, 1-1/8 Chisel Capacity (in.) 1/4 - 1 Chisel Center to Fence (in.) 4 Chisel Shank Capacity (in.) 5/8 I.D., 3/4 I.D., 1-1/8 I.D. Chisel Stroke (in.) 10-3/4 Chisel Stroke Maximum (in.) n.a. Chuck Distance to Base (in.) n.a. Chuck Distance to Table (in.) n.a. Chuck Size (in.) 1/2 Column Diameter (in.) n.a. Drilling Capacity (in.) n.a. Fence Size (L x H/in.) 4-1/2 x 20-1/4 Head Stroke (in) 6 Head Travel (front to back/in.) n.a. Head Travel (left to right/in.) n.a. Height 74 inch Length 21.25 inch Maximum Work Piece Height (in.) n.a. Model Number 719T Motor HP 1HP Motor Phase 1PH Motor Voltage 115/230V Net Weight 276 pound Overall Dimensions 21-1/4 x 21-5/8 x 74 Part Number 1791264K Prewired Prewired 115V Ship Weight 292 pound Spindle Distance to Base (in.) n.a. Spindle Distance to Table (max./in.) n.a. Spindle Speed (RPM) 1725 Spindle Speeds n.a. Spindle Taper n.a. Spindle Travel (in.) n.a. Swing (in) n.a. Table Size (in.) 7 x 20-1/4 Table Size Fully Extended (L x W/in.) n.a. Table Tilt (deg.) 0 to 35 Table Travel - Cross (in) 4 Table Travel -Longitudinal (in) 15-1/2 Under Hold-Down (in.) n.a. Width 21.625 inch Part # Description 6285526 1/4" Chisel and Bit 6285527 5/16" Chisel and Bit 6285528 3/8" Chisel and Bit 6285529 1/2" Chisel and Bit 719T breakdown 719T breakdown for stand WARRANTY AND SERVICE WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
Customer Reviews:
Avg. Customer Rating: 5.0 / 5.0
Can I gush?:
First of all, I'm an old-school, professional furnituremaker. I'm pretty fast with a drill press and a couple Sorby mortising chisels. This mortiser is exquisite. For the money it's a huge leap forward in my shop, easily slated to pay for itself within a month. The table's movement, after backing off the factory squeeze on the dovetail gibs a bit, is butter. The side travel end stops could be stronger and easier to get at but they're head and shoulders ahead of the General International mortiser I... more info
Unbelievable:
I recently had the chance to use this floor standing mortiser at a trade show and could not be more impressed. I've demo'd benchtop models of the Delta 651, the General, the Powermatic, and the Steel. Though adequate, the benchtop mortisers works well. But if you really want ease of operation, great wood clamping, big lever arms (ease of work), and the capacity to roll through 3/4" mortises, then this machine is unreal. 1.1K is alot to pay for a mortiser, but if you have the cash.....and do a good deal of... more info
Great choice:
This mortiser is easy to set up, very accurate and has a lot of power. Included with the mortiser is an extension if you choose to use another brand of chisel & bit. (Powermatic chisels are about 2" longer than most other brands.) I used this tool most often in making blind mortises on face fronts. When finished, the joint requires little hand work to clean out the bottom of the mortise.
The only improvement that Powermatic could do is to make adjusting the angle on a bevelled mortise easier.... more info
