Features:

• 1-1/4-inch to 2-1/2-inch coil siding nailer with 500 pounds of driving power
• Drives wire weld and plastic collated coil nails; tool-free depth adjustment; directional exhaust
• Lightweight, durable magnesium housing
• Includes nailer and carrying case

Editorial Review:

Leaving a rosebud on the finished siding is a thing of the past when using the Bostitch N66C-1 pneumatic nailer. Now you can drive wire weld and plastic inserted coil nails in to all types of siding materials such as wood panels or wood siding, fiber cement board such as Hardie Plank and even light gauge steel. By simply adjusting the depth guide you can "power nail" decking, fencing and some heavier shingle materials. The lightweight body, just 4.4 pounds, is easy to handle and the durable aluminum body will add years to the life of the tool. The N66C-1 is designed with a soft rubber foot to prevent scarring or damage to the working surfaces plus an adjustable exhaust port that can be easily set to divert the exhaust away from the user. A handy rugged storage/carrying case is included to prevent accidental damage and to keep the tool clean. --C. Dwight Barnett

Customer Reviews:

Avg. Customer Rating: 4.5 / 5.0

Siding gun:

I had some Hardiboard lap siding to install on a customers house and bought this nailer to do the job.It worked excellent.Can't beat it for the price. Other guns I look at were up to $400 so at the price this was a bargain. would reccommend.

n66 Bostich not very good:

i bought this gun about 2 years ago and I am quite disappointed in it's performance. i am a builder and use it primarily for siding. It will not completely drive nails into anything much harder than cedar or balsa wood!! Forget about driving into Hardie trim or even Miratec. Like a lot of Bostich nailers, it's a piece of junk!

excellent siding gun:

Bought this gun to do a Hardi Plank fiber cement job. Gun worked great, went through a box of 3600 2 1/2 inch nails without a problem. Has a nice handle on it to hang on ladder when not in use. I did buy an attachment for the nose of the gun that sets the nail at 1" from top of siding, saving time and eliminating a wrongly placed nail. I blind nailed the siding. The attachment was from Big Sky Adapters.
Very pleased with the gun as I am with my other Bostich nailing guns.

Good feel, too light.:

I'm a professional carpenter and I bought the Bostitch n66c for most recent house that I'm building. After 20 square i've found that the gun is great. It has on;y miss fired a few times and usually because the coil is almost out. The air exhaust positioning is awsome, the balance great. The downside is that the gun is too light. i found that you have to push extra hard for the nails to seat at the depth that you have the gun adjusted for. My buddy has an older, heavier version of this gun by Bostitch and... more info

Accessories:

PUR-Hose PUR-14X050 1/4-Inch x 50 Polyurethane 250 PSI Air Hose from PUR-Hose (Tools & Hardware) - Usually ships in 24 hours

Maxus MXA109 I/M Connector Kit from Campbell Hausfeld (Tools & Hardware)

Campbell Hausfeld MP5200 25-Piece Accessory Kit with Case from Campbell Hausfeld (Tools & Hardware) - Usually ships in 24 hours

Similar Products:

B & C Eagle 2X090HDRC Round Head 2-Inch by .090-Inch by 15 Degree Wire... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

SoloSider Siding Tools For Fiber Cement Siding And LP Smartside 3/8, Fully... from SoloSider LLC (Misc.)

Bostitch C6R90BDG Thickcoat 2-Inch by .090-Inch Ring Shank by 15 Degree Coil... from Bostitch (Tools & Hardware) - Usually ships in 24 hours

Bostitch C8R90BDG Thickcoat 2-1/2-Inch by .090-Inch 15 Degree Ring Shank Coil... from Bostitch (Tools & Hardware) - Usually ships in 24 hours

B & C Eagle 134X090HDRC Round Head 1-3/4-Inch by .090-Inch by 15 Degree Wire... from B & C Eagle (Tools & Hardware) - Usually ships in 24 hours

Pacific International Tool & Shear SS404 SteelHead Fiber Cement Cutting... from Pacific International Tool & Shear (Tools & Hardware) - Usually ships in 24 hours

Malco FCMS 5-Inch to 8-Inch Exposure Facing Gauge and Overlap Gauge Set from Malco Products (Tools & Hardware) - Usually ships in 24 hours

Malco FCG2 1-1/4 Inch Overlap 5/16-Inch Thickness Fiber Cement Siding Gauge,... from Malco (Tools & Hardware) - Usually ships in 24 hours

Bostitch C3R80BDG Thickcoat Round Head 1-1/4-Inch by .080-Inch by 15 Degree Wire... from Bostitch (Tools & Hardware) - Usually ships in 24 hours

Also visit Main Street Tool & Supply Co.

Sponsor Results: