Features:

• 0
• DELJ9

Editorial Review:

Extra-large spindle bearings "6 PLUS 6" and "VS6" spindle and spindle pulley are supported by four over-sized, pre-loaded, lubrcated-for-life ball bearings. Massive quill is a full 2" diameter. "VS6" has the same excellent construction, PLUS an extra bearing below the spindle pulley. This fine combination of features assures freedom from chatter, long, maintenance-free life and maximum pressure at the drill point. Six speeds offer unbelievably wide range of speeds with a low-cost 1725 rpm motor- 425, 600, 1100, 2050, 3900 and 5500 rpm- 11.8 to 1 speed ratio.

Accessories:

Delta 17-924 Mortising Attachment with 1/4 Inch, 5/16 Inch, 3/8 Inch, and 1/2... from Delta (Tools & Hardware) - Usually ships in 24 hours

Delta 17-921 6-Inch Drill Press Vise Clamp from Delta (Tools & Hardware) - Usually ships in 24 hours

Delta 17-922 9-Inch Drill Press Vise Clamp from Delta (Tools & Hardware) - Usually ships in 24 hours

Delta 17-939 Drill Press Utility Tray from Delta (Tools & Hardware) - Usually ships in 24 hours

Delta 20-619 6-Inch Drill Press Vise from Delta (Tools & Hardware) - Usually ships in 24 hours

Also visit Main Street Tool & Supply Co.

Sponsor Results: