Features:

• Equipped with a 3 HP, 3,450 RPM, 230 Volt, 60 Hz single phase motor
• Standard 1 micron filtration bags keep your shop sader and cleaner
• Powerful TEFC induction motor for long-lasting, smooth performance with protection from damaging dust; the dust ports and motor housing can be oriented facing up or down
• Snap-in bag rings are faster, easier and eliminate the need for cam-over-lock style clamps

Editorial Review:

Includes 3 HP Dust Collector 2700 CFM - 50-763, Motor & Blower, Support Frame, (2) 1 Micron Filtration Bags, (4) 6 Mil Plastic Chip Collection Bags, (2) Snap-In Bag Rings, (4) 4" Intake Ports, (4) Swivel Caster Assemblies, Instruction Manual.

Customer Reviews:

Avg. Customer Rating: 4.0 / 5.0

satisfied:

Unit is very sturdy and 3hp motor generates a lot of suction. Make sure you have the vertical space for this unit -- over 9ft tall with the included felt bags. Also, was surprised to discover you have to add a cord and plug -- the manual says that to meet code, this dust collector has to be permanently connected to a designated circuit. The cart has good casters -- knobby rubber wheels. The motor can be mounted either up or down. The inlets (four) are 4 inches in diameter -- would have been nicer with 6"... more info

Accessories:

Delta 50-355 4-Inch Dust Connector Adapter for 10-Inch Unisaw Table Saw from Delta (Tools & Hardware) - Usually ships in 24 hours

PSI Woodworking D50A 4-Inch by 50 Flexible Dust Collection Hose from PSI Woodworking (Tools & Hardware) - Usually ships in 24 hours

Jet JW1000 4-Inch to 2-1/4-Inch OD 2-Inch ID Reducer from WMH Tool Group (Tools & Hardware) - Usually ships in 24 hours

Delta 50-479 5-Inch - 4-Inch Reducer from Delta (Tools & Hardware) - Usually ships in 24 hours

PSI Woodworking D4X4JW 4-Inch Quick Disconnect from PSI Woodworking (Tools & Hardware) - Usually ships in 24 hours

Also visit Main Street Tool & Supply Co.

Sponsor Results: