Features:

• Time-saving and accurate saw fence micro-adjuster
• Allows you to dial-in precise adjustments easily with one hand
• Easy-to-grip ribbed dial
• Black plastic fixing knob

Editorial Review:

Dial in precise adjustments to your Kreg band saw fence with the precision microadjuster.

The Kreg Micro-Adjuster for Band Saw Fences allows you to dial-in precise adjustments easily with one hand. It features a ribbed dial, which is easy to grip with just one hand or thumb, and a black plastic fixing knob to easily lock the adjustment. The micro-adjuster is backed by a manufacturer's limited 30-day warranty.

Customer Reviews:

Avg. Customer Rating: 3.5 / 5.0

Not easy to use:

I purchased the micro adjuster to go with the kreg band saw fence. I had a hard time setting up the micro adjuster, in fact I never got it to work correctly. It hindered the smooth back and forth movement of the fence and actually made the set up more difficult. I finaly gave up and returned the product. The fence on the other hand works great-very high quality and accuracy.

KREG Micro Adjuster:

I added the Kreg Micro Adjuster to my Kreg router table to allow very minor adjustments to my router fence position. It does a supperb job if you need very fine positioning of the fence.

Needs careful adjustment:

I bought the Kreg band saw fence and the micro-adjuster about three months ago. At first, I couldn't get the adjuster to work at all--the wheel you're supposed to turn was difficult to grip and the amount of force required to turn it was excessive. So I just put the thing on a shelf and decided that the only good thing about it was that it didn't cost very much.
Then I was reading Mark Duginske's band saw book and saw a picture of a micro-adjuster on an Inca band saw. Duginske says they're wonderful... more info

Mostly a gimmick:

I bought this for my Kreg band saw fence and while I like the fence a lot, this little thing is sort of a waste of money. For one, it's difficult to use; the wheel is really small and it's difficult to turn with any tension on the main fence. Here's the rub, in order to move the fence with this thing, you have to unlock the fence but only a little - so that there is still some tension on it, thus making it difficult to move. In the end, I find that the precission is lost when the fence is loosened and... more info

Accessories:

Kreg MKJKIT Mini Kreg Jig Kit from Kreg (Tools & Hardware) - Usually ships in 24 hours

Kreg KMS8000 Precision Trak and Stops Kit from Kreg (Tools & Hardware) - Usually ships in 24 hours

Kreg KMS7200 Bandsaw Fence from Kreg (Tools & Hardware) - Usually ships in 24 hours

[no image] Fine Woodworking (Magazine)

Kreg R2 Rocket Pockethole System from Kreg (Tools & Hardware)

Similar Products:

Kreg KMS7200 Bandsaw Fence from Kreg (Tools & Hardware) - Usually ships in 24 hours

Kreg KMS7214 7-Inch Resaw Guide from Kreg (Tools & Hardware) - Usually ships in 24 hours

Kreg KMS7213 4-1/2-Inch Resaw Guide from Kreg (Tools & Hardware) - Usually ships in 24 hours

Kreg PRS3020 True-FLEX Featherboard - Twin Pack from Kreg (Tools & Hardware) - Usually ships in 24 hours

Kreg PRS1040 Precision Router Table System from Kreg (Tools & Hardware) - Usually ships in 24 hours

Kreg KMS7801 Standard Flipstop from Kreg (Tools & Hardware) - Usually ships in 24 hours

Kreg PRS3090 3" Dual Locking Caster-Set (4 Piece) from Kreg (Tools & Hardware) - Usually ships in 24 hours

Kreg KMS7303 30-Inch Jig and Fixture Bar from Kreg (Tools & Hardware) - Usually ships in 24 hours

Kreg KMS7724 12 Self-Adhesive Measuring Tape (Left-Right Reading) from Kreg (Tools & Hardware) - Usually ships in 24 hours

Also visit Main Street Tool & Supply Co.

Sponsor Results: