Features:

• 1.5 HP 1,250 CFM dust collector makes shops cleaner, healthier, and more productive environment
• Forceful 1.5 HP motor provides 1,250 CFM
• Sturdy steel base with four easy gliding wheels
• Bottom bag provide 42-gallon capacity; 1-micron top bag captures tiny dust particles

Editorial Review:

The JDS Dust-Force 1.5 HP 1,250 CFM Dust Collector with 1-Micron Canister makes a shop cleaner, healthier, and more productive environment. A forceful 1.5 HP motor provides 1,250 CFM. The sturdy steel base with four easy gliding wheels make moving from machine to machine a breeze. A spun-bond polyester bottom bag provide a 42-gallon capacity, the 1-micron top bag captures tiny dust particles. The 1.5 HP motor 115/230-volt comes pre-wired for 115-volt. The Dust-Force includes an 11-inch steel fan, and one 5-inch intake port with 2/4-inch diameters. With a 76-inch compact size and powerful performance, this dust collector is ideal for most small shops. It comes with a 1-year warranty.

Customer Reviews:

Avg. Customer Rating: 4.5 / 5.0

Decent dust collector, but not flawless.:

I thought I already reviewed this. If so, sorry for the repetition, but Amazon just asked me to write a review.
This collector works well but has a couple minor design flaws. Watch the hooks that hold up the dust collection bag. They are sharply pointed and I've pierced my fingers more than once putting a new bag on. The hose that connects between the motor and the collector just barely fits. You'll need to apply elbow grease to get this clamped on.
The packaging is also very messy. It's that... more info

Awesome collecter.:

Bought this unit about two years ago on Amazon. Easy to use I used 4 inch outdoor drain lines with blast gates from Rockler. Works great and cut down on the dust I breathe. I compbined this with a Jet overhead hanging unit. This reduces table saw dust by about 90% and probably does the same for my drum sander with about 40 feet of pipe running to it.

None better for the price:

There were no other dust collectors on the market with canisters that filter down to 1 micron at the time I ordered this. Delta's and Jet's canister models go down to only 2 microns for the same price or more. In my use of the JDS so far it has simply been wonderful. Changing out the lower bag is a little bit of a hassle, but I've learned to just temporarily masking-tape the bag to the housing before I get the band clamp secured.
My one bit of advice would be to order this direct from JDS rather than... more info

JDS dust collector:

JDS makes some top notch products for dust control. The collector is definitely worth the price. It is well packed and goes together easily with the clear directions and pictures. The best part is it works, and works very well. I would say I'm getting 20 % more suction power and none of the dust escapes the bag or cannister. I wish I had seen this machine before I bought another one with the regular bags you see, I'll save that one for chips and the JDS for sanding.This is a quality product. For once you're... more info

Similar Products:

JDS Company 16004 Dust-Force Plastic Bags - 5 Pack from JDS Company (Tools & Hardware) - Usually ships in 24 hours

Jet JW1044 4-Inch to 2-1/2-Inch Reducer from JET (Tools & Hardware) - Usually ships in 24 hours

JET JW1317 4-Inch Wire Hose Clamp from JET (Tools & Hardware) - Usually ships in 24 hours

Jet JW1047 4-Inch Quick Disconnect from JET (Tools & Hardware) - Usually ships in 24 hours

Jet JW1031 4-Inch x 10-Foot Black Dust Collection Hose from JET (Tools & Hardware) - Usually ships in 24 hours

Jet JW1015 4-Inch Y-Fitting Dust Hose Connector from JET (Tools & Hardware) - Usually ships in 24 hours

Jet JW1019 4-Inch Splice from JET (Tools & Hardware) - Usually ships in 24 hours

PSI Woodworking D50A 4-Inch by 50 Flexible Dust Collection Hose from PSI Woodworking (Tools & Hardware) - Usually ships in 24 hours

Jet JW1038 4-Inch Quick Disconnect with Smooth End from JET (Tools & Hardware) - Usually ships in 24 hours

Also visit Main Street Tool & Supply Co.

Sponsor Results: