Features:

• Designed to fit Milwaukee 7150-21, DeWalt, Porter-Cable, Ridgid, Senco, and most other 18-gauge brad finish nailers
• Galvanized finish for longevity
• Proven to comply with the ESR-1539 building code
• Meets or exceeds applicable ASTM standards

Editorial Review:

The Milwaukee 3/4-inch 18-gauge Brad Nails feature a galvanized finish and have been rigorously tested and proven to comply with building codes as described in the ESR-1539 evaluation report. The nails are also guaranteed to meet or exceed applicable ASTM standards. The nail brads are designed to fit Milwaukee 7150-21, DeWalt, Porter-Cable, Ridgid, Senco, and most other 18-gauge brad finish nailers.

Similar Products:

Milwaukee 7150-21 5/8-Inch to 2-1/8-Inch 18 Gauge Brad Nailer from Milwaukee (Tools & Hardware) - Usually ships in 24 hours

Milwaukee 7155-21 3/8-Inch to 1-1/2-Inch 18 Gauge Narrow Crown Stapler from Milwaukee (Tools & Hardware) - Usually ships in 24 hours

DEWALT DCS16150 1-1/2-Inch by 16 Gauge Finish Nail (2,500 per Box) from DEWALT (Tools & Hardware) - Usually ships in 24 hours

DEWALT DCS16200 2-Inch by 16 Gauge Finish Nail (2,500 per Box) from DEWALT (Tools & Hardware) - Usually ships in 24 hours

Porter-Cable PSH1 Gravity Feed Spray Gun from Porter-Cable (Tools & Hardware) - Usually ships in 24 hours

Freud LU85R010 10-Inch 80 Tooth ATB Ultimate Cut-Off Saw Blade with 5/8-Inch... from Freud (Tools & Hardware) - Usually ships in 24 hours

Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with... from Forrest (Tools & Hardware) - Usually ships in 24 hours

PUR-Hose PUR-14X050 1/4-Inch x 50 Polyurethane 250 PSI Air Hose from PUR-Hose (Tools & Hardware) - Usually ships in 24 hours

Hitachi NT50AE2 3/4-Inch to 2-Inch by 18 Gauge Brad Nailer from Hitachi (Tools & Hardware) - Usually ships in 24 hours

Also visit Main Street Tool & Supply Co.

Sponsor Results: