Features:

• Adapts a spindle thread of 1-1/4-by-8 tpi to a 1-inch-by-8 tpi chuck
• Made of steel
• Has flats to allow wrench to hold when tightening
• Permits the use for different size accessories

Customer Reviews:

Avg. Customer Rating: 4.5 / 5.0

PSI Lathe Spindle Adapter:

Well made adapter. It runs true, and the threads a properly cut. The price is very good. There needs to be a 5/16" center hole drilled to allow use with a vacuum system, but that can easily be done on the lathe. Also, there should be two holes drilled and tapped for set screws to be used to secure the adapter to the lathe spindle if you plan on using reverse. Both of these missing qualities are easily remedied in the shop, and if added to the retail version would probably cause a price increase (??).

Versatility at the lathe:

I purchased this spindle adapter so I could switch chucks back and forth between my lathes which have different spindle sizes. It also came in handy when making a threading jig. Nice machining.

Works great:

WOrks as advertised, only suggestion is to drill through the 1 X 8 end for use with a vacuum chuck.

Headstock Spindle Adaptor:

The adaptor (1-1/4 x 8 tpi to 1 inch x8tpi chuck) was machined better than I thought it would be. No snags when turning it into place from either the 1-1/4 or 1 inch ends. It is, however, solid on the 1 inch end. If you have a vacuum system that goes through the headstock and you have 1 tpi vacuum bells you will not be able to form your vacuum, obviously.

Accessories:

[no image] Fine Woodworking (Magazine)

Work Sharp WS3000 Wood Tool Sharpener from Work Sharp (Tools & Hardware) - Usually ships in 24 hours

Woodworking Basics: Mastering the Essentials of Craftsmanship by Peter Korn (Paperback) - Usually ships in 24 hours

Similar Products:

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System from PSI Woodworking (Tools & Hardware) - Usually ships in 24 hours

PSI Woodworking LCENTSS22 #2 MT w/ 1-Inch Crown Super Wood Lathe Drive Center from PSI Woodworking (Tools & Hardware) - Usually ships in 24 hours

PSI Woodworking CJAWFJ2 Jumbo Flat Jaws from PSI Woodworking (Tools & Hardware) - Usually ships in 3 to 6 weeks

PSI Woodworking LCBEAD4 4 Piece HSS Bead Cutting Lathe Chisel Set from PSI Woodworking (Tools & Hardware) - Usually ships in 24 hours

JET 708359 JWL-1642EVS 16-Inch Swing 42-Inch between Centers 1-1/2 Horsepower... from WMH Tool Group (Tools & Hardware) - Usually ships in 2 to 3 days

PSI LCENTLT2 #2MT Heavy Duty Live Lathe Center from PSI Woodworking (Tools & Hardware) - Usually ships in 24 hours

PSI Woodworking LCENT4 4 Piece Wood Lathe Center Set for #2 MT from PSI Woodworking (Tools & Hardware) - Usually ships in 24 hours

The Art of Segmented Wood Turning: A Step-by-Step Guide by Malcolm Tibbetts (Paperback) - Usually ships in 24 hours

PSI CXC/MT2 Expanding Collet Lathe Chuck for Mounts With A #2 Morse Taper from PSI Woodworking (Tools & Hardware) - Usually ships in 24 hours

Also visit Main Street Tool & Supply Co.

Sponsor Results: