Customer Review: This adapter works great for what it is designed for. It is only for changing 4 inch hose to 2 1/2 hose. Not designed to connect directly to a tool or shop vacuums. Usually the 2 1/2 inch hose will connect to the tool.
Customer Review: My dust collector system has a 4 inch hose and a 2 inch end on the saw (dust connector). So I needed this quick disconnect to attach the two different size hoses together. It works very well for my needs
Customer Review: Jet JW1007 4-Inch Blast Gate These Woodstock International blast gates are identical to the ones I began using over 20 years ago. This same blast gate is sold by countless vendors; Jet is just one of many. They are inexpensive and work acceptably, although they leak a little air when... more info
Customer Review: I was hoping that this would save some time by not having to attach clamps each time I switched to a different machine. That has not been the case. The fit on most of my machines is not good. The connector simply slips off after a few seconds. I would reiterate what another reviewer said about... more info
Customer Review: This DC is great machine for a small shop. Setup was easier then I expected. It does take an extra set of hands to setup. I have used it with my planer and bandsaw and what a difference. I should have done this sooner. The only negative is the specs say the machine runs on 110 or 220. What they... more info
Customer Review: This is the first and last Jet product I'll ever buy. Very poor design includes a internal mitered corner that has sharp edges and reduces flow area by at least a third. If you want a dust collector that plugs up use these elbows.
