Jigs & Templates - junkwarehouse.com Product Guide

Home / Tools / Brands / Porter-Cable / Accessories / Jigs & Templates

How-To Articles: Getting Tough on Dust | Crown Molding Made Easy
Custom-Made Picture Frames


1.		Porter-Cable 42234 Corner Chisel from Porter-Cable Price: $18.41 Customer Review: Is it me, or what? Once I router cut a door-hinge mortise using a Porter-Cable hinge mortise jig, I can't seem to get the Porter-Cable corner chisel far enough back in the corner of the router cut to get the edges lined-up. After I use the corner chisel, I still need to a wood chisel to take out a... more info	Customer Rating: 4.0 / 5.0 Click here for more information


2.		Porter-Cable 42000 9-Piece Template Guide Kit from Porter-Cable Price: $31.38 Customer Review: with plenty of uses due to the variety of sizes available. i have found that some of the guides are very long so they need to be cut down to a more suitable length.	Customer Rating: 3.5 / 5.0 Click here for more information


3.		Porter-Cable 59370 Door Hinge Template from Porter-Cable Price: $28.04 Customer Review: Overall I was able to make the jig work, but more flexibility/adjustment in the hinge depth would be a huge asset. I was refitting 12 doors on a renovation and the hinges were not set back as far as the Porter Cable Unit had them by default. Using there default location would have meant I would have... more info	Customer Rating: 3.5 / 5.0 Click here for more information


4.		Porter-Cable 59381 Hinge Butt Template Kit from Porter-Cable Price: $217.10 Customer Review: The first time through is slow until you understand the principle of the jig. Then it goes quickly the second time. The jig works very well, especially for "non-standard" conditions. If you have many doors to hang, I would highly recommend this product. It has saved me hours of time without... more info	Customer Rating: 4.0 / 5.0 Click here for more information


5.		Porter-Cable 4213 Through Dovetail / Box Joint Templet Kit from Porter-Cable Customer Review: I originally bought the 4210 PC jig which only allowed me to route half blind dovetail. I really liked the jig and decided to invest a little more (I whish I bought the package with both template at first) and bought the through templet. The setup is a little more difficult than the half blind... more info	Customer Rating: 4.0 / 5.0 Click here for more information


6.		Porter-Cable 4215 Mini Through Templet from Porter Cable Price: $73.89 Customer Review: The 9/32" dovetail is VERY FRAGILE - when I tried cutting my first dovetail it broke within the first 1/4" of my first cut. I looked at the cut and determined it was not aligned PERFECTLY with the template, so when the bit tried to go into the template it bent the bit and it broke. Porter Cable... more info	Customer Rating: 3.5 / 5.0 Click here for more information


7.		Porter Cable 5507 9/64-Inch Pilot Hole Bit for 552 Production Pocket Cutter from Porter-Cable Price: $16.95	Click here for more information


8.		Porter-Cable 513 1-1/2 Horsepower Lock Mortiser from Porter-Cable Price: $1,057.90 Customer Review: Great Tool. We had (14) custom mortisse locks to install in white oak doors. No room for error. Once set up correctly (took some practice runs in scrap wood), the tool did each lock cut out in minutes. Expensive, yes. It is a great tool if you have a large # of deep mortisse locks to do.	Customer Rating: 5.0 / 5.0 Click here for more information


9.		Porter-Cable 517 Lock Face Template from Porter-Cable Price: $199.00 Customer Review: I am really excited about this template... and pretty dissappointed too. Our trade is finish carpentry and we do a lot of high end custom doors. This was the completion of our full mortice machine (nothing else like it for morticing full mortice lock boxes 5* for sure). We have two... more info	Customer Rating: 3.0 / 5.0 Click here for more information


10.		Porter-Cable 511 Lock Installation Kit, Cylindrical Lock Boring Jig from Porter-Cable Price: $194.93 Customer Review: My gut told me not to buy this after reading some less than stellar reviews. Well, I did it any way and I regret it. The jig is flimsy, which makes it hard to drill a straight hole. The 1" auger bit is WAY TO AGGRESSIVE! I'm not trying to hog through studs, here! After making my drill smoke, I... more info	Customer Rating: 3.0 / 5.0 Click here for more information

1 - 10

Portions © Amazon.com, Inc.

Also visit Main Street Tool & Supply Co.

Sponsor Results:

Work Boots at the lowest prices guaranteed at BootBay! click here
BootBay - Guaranteed Lowest Prices! click here
Free Shipping on BootBay! - click here