1.Hitachi NT50AE2 3 4-Inch to 2-Inch by 18 Gauge Brad NailerHitachi NT50AE2 3/4-Inch to 2-Inch by 18 Gauge Brad Nailer
from Hitachi
Price: $73.15

Customer Review:
Bang for your buck, this thing is awesome! Nice features and controls, a full 2" capacity and very light weight. I particularly like the no tool jamb clearing (although I have yet to have a jam with Senco and Porter Cable brads), no trigger change to go from bump fire to sequential fire mode, 360... more info

Customer Rating:
4.5 / 5.0


Click here for more information


2.Hitachi NR90AE Round Head 2-Inch to 3-1 2-Inch Framing NailerHitachi NR90AE Round Head 2-Inch to 3-1/2-Inch Framing Nailer
from Hitachi
Price: $273.43

Customer Review:
I love this nailer. I was concerned about working with the rough-cut seasoned oak studs in my 60 year old home. Not a problem with this powerful nailer - went right into them.

Customer Rating:
5.0 / 5.0


Click here for more information


3.Hitachi NT65MA2 15 Gauge 1-1 4-Inch to 2-1 2-Inch Angled Finish NailerHitachi NT65MA2 15 Gauge 1-1/4-Inch to 2-1/2-Inch Angled Finish Nailer
from Hitachi
Price: $169.00

Customer Review:
This nailer from Hitachi is an excellent tool. It is lightweight and quite easy to handle, yet plenty of power to drive long nails in hard woods. The pricing is very reasonable for a quality tool. It uses standard nails readily available. I got this nailer to replace a Senco nailer. The Hitachi... more info

Customer Rating:
4.5 / 5.0


Click here for more information


4.Hitachi NR90GR Round Head 2-Inch to 3-1 2-Inch Cordless Gas Framing NailerHitachi NR90GR Round Head 2-Inch to 3-1/2-Inch Cordless Gas Framing Nailer
from Hitachi
Price: $242.50

Customer Review:
I purchased this nail gun for a roofing job that required a total reframe of the sagged structure. I was excited to avoid the hoses all over the place and the sound of the compressor over my stereo.
The description says it shoots 3 1/2" nails. It does shoot them, but only 20% actually go in all... more info

Customer Rating:
3.5 / 5.0


Click here for more information


5.Hitachi NR83A2 Round Head 2-Inch to 3-1 4-Inch Framing NailerHitachi NR83A2 Round Head 2-Inch to 3-1/4-Inch Framing Nailer
from Hitachi
Price: $279.99

Customer Review:
GREAT GUNS BUILD GREAT HOMES. GOOD DEPTH ADJ. COMFORTABLE AND SEEMS TO JAM LESS THAN THE 3 OTHER TOP BRANDS WE HAVE TRIED.THE ONLY GUNS IN OUR JOB TRAILER NOW!!!!

Customer Rating:
4.5 / 5.0


Click here for more information


6.Hitachi NV45AB2 7 8-Inch to 1-3 4-Inch Roofing NailerHitachi NV45AB2 7/8-Inch to 1-3/4-Inch Roofing Nailer
from Hitachi
Price: $283.43

Customer Review:
This roofing Nailer jammed more than I think it should. You could figure on at least one jam per roll which is 120 nails! The point that is most likely to jam is at the last nail. Usually it falls out on its own but if it hangs up you can figure on a jam. I also had it shoot two or even 3 hails at a... more info

Customer Rating:
4.5 / 5.0


Click here for more information


7.Hitachi NV65AH 2-1 2-Inch Coil Siding NailerHitachi NV65AH 2-1/2-Inch Coil Siding Nailer
from Hitachi
Price: $349.00

Customer Review:
I had a terrible paint/siding problem on my home and finally decided to tear off all the trim and siding and start completely over. This gun saved countless hours and honestly made the project a joy! Driving nails into fresh studs may sound easy for any nailgun but this gun had no problems driving... more info

Customer Rating:
4.0 / 5.0


Click here for more information


8.Hitachi NR83A2S Round Head 2-Inch to 3 1 4-Inch Framing Nailer with Sequential TriggerHitachi NR83A2S Round Head 2-Inch to 3 1/4-Inch Framing Nailer with Sequential Trigger
from Hitachi
Price: $297.40

Customer Review:

I asked my contractor friend what framing nailer I should get. This was the one he mentioned. It is a powerful versatile tool. I have used it for deck work and wall framing. I like the adjustable safety options. For a framing novice it let me set it on full safety. At the same time it leaves... more info

Customer Rating:
4.5 / 5.0


Click here for more information


9.Hitachi NT65M2 1-Inch to 2-1 2-Inch 16 Gauge Finish NailerHitachi NT65M2 1-Inch to 2-1/2-Inch 16 Gauge Finish Nailer
from Hitachi
Price: $161.81

Customer Review:
The spray button is a nice touch. A solid gun, although hideous, and the grip and trigger are nice. No jambs to report. I actually shot 18ga nails in a pinch out of this gun (not recommended!) but it shot them two at a time for a while and still didn't jamb! Why they made it look like an alien... more info

Customer Rating:
4.0 / 5.0


Click here for more information


10.Hitachi NV45AB2S 7 8-Inch to 1-3 4-Inch Coil Roofing NailerHitachi NV45AB2S 7/8-Inch to 1-3/4-Inch Coil Roofing Nailer
from Hitachi
Price: $295.95

Customer Review:
After extensive research I chose the Hitachi roofing nailer and was not at all disappointed. The nailer proved to perform excellent under all conditions. No matter how fast I went it did not misfire or jam. The only time I did have a problem was when I went to use it for the first time. After it was... more info

Customer Rating:
5.0 / 5.0


Click here for more information


1 - 10

More Results

Portions © Amazon.com, Inc.

Also visit Main Street Tool & Supply Co.



Sponsor Results:

Work Boots at the lowest prices guaranteed at BootBay! click here
BootBay - Guaranteed Lowest Prices! click here
Free Shipping on BootBay! - click here