Dust Collector Accessories - junkwarehouse.com Product Guide

Home / Tools / Brands / Delta / Accessories / Dust Collector Accessories

How-To Articles: Getting Tough on Dust | Crown Molding Made Easy
Custom-Made Picture Frames


1.		Delta 50-359 12-Inch Planer Connect from Delta Price: $15.84 Customer Review: Installed in 1 minute and works great. I wish the price was a little cheaper.	Customer Rating: 4.5 / 5.0 Click here for more information


2.		Delta 50-446 Dust Connector for Delta Model 22-580 from Delta Price: $24.56 Customer Review: I use this with a 3/4 HP Porter Cable AP300 Dust Collector. That model of dust collector is rated at 500 CFM, which is used with a trash can lid collector. Most of the time, I work with red oak, white oak, and occasionally hard maple. With those species, it usually works ok.... more info	Customer Rating: 4.0 / 5.0 Click here for more information


3.		Delta 50-445 4-Inch Dust Collector Chute (For Models TP400LS, 22-565 and 22-560) from Delta Price: $18.90 Customer Review: This was a snap install. Plaining wider boards nothing excapes, when plaining narrow wood a small amount of chips may excape. Overall this has helped my shop stay far cleaner	Customer Rating: 4.0 / 5.0 Click here for more information


4.		Delta 50-479 5-Inch - 4-Inch Reducer from Delta Price: $3.02 Customer Review: I bought two of these for my minimax fs30 jointer planer, which has a metric fitting slightly larger than 5". Tapped this thing on tight with a plywood board and a mallet, works great, especially with the Jet 4" quick disconnect fitting on my DC hoses. Suction is tight. Works just as I'd hoped, I... more info	Customer Rating: 3.0 / 5.0 Click here for more information


5.		Delta 50-471 14-Inch Dust Collection Hood Customer Review: This really helped reduce the amount of cleaning I need to do after being int he shop. I have since upgraded to a Cabinet Saw and this will go to whoever buys the old contractors saw.	Customer Rating: 4.5 / 5.0 Click here for more information


6.		Delta 50-211 4-Inch Dust Adapter for 37-070 from Delta Price: $28.49 Customer Review: Installation wasn't easy as the two upper bolt holes were way off. I also tried installing it upside down, but had the same problem. Since it is made of sheet metal I used a rattail file to elongate the holes. Eventually it installed. I also used weather stripping along the sides connecting to the... more info	Customer Rating: 4.0 / 5.0 Click here for more information


7.		Delta AP050 Shopmaster 4-Inch Dust Collector Connector Pack from Delta Price: $94.58 Customer Review: I must agree with the comments of the previous reviewer. While the quality of the product is great and the value is good you really should not be using "T's" or tight 90 degree bends as they cut the air flow significantly. Buy as many Y's or branches as you can to complete your task, finding end... more info	Customer Rating: 3.5 / 5.0 Click here for more information


8.		Delta 50-830 Micron Dust Bag (For Model 50-850) from Delta Price: $94.98 Customer Review: This product is actually TWO one micron bags for an 850. It contains both the top and bottom bags. Same belt loop construction as the original 30 micron bags. Don't see the usual vapor cloud of fine dust suspended in the air so I assume they are working as they are supposed to. Bags have no company... more info	Customer Rating: 4.0 / 5.0 Click here for more information


9.		Delta 50-750 2-Micron Canister for 50-850 Dust Collector from Delta Price: $242.29 Customer Review: I have used this canister filter for over a year now replacing my optional one micron bags. I prefer the canister over the low micron bags mostly due to the bags never inflate fully (which is normal). Visually the low bags would catch my eye when I was wearing hearing protection and I would become... more info	Customer Rating: 5.0 / 5.0 Click here for more information


10.		Delta 50-355 4-Inch Dust Connector Adapter for 10-Inch Unisaw Table Saw from Delta Price: $39.53 Customer Review: THIS IS THE ADAPTOR YOU WANT IF YOU HAVE A 4" DUST COLLECTOR. THE PICTURE IS MISLEADING BECAUSE THE DUST CHUTE IS NOW OFFSET TO CLEAR ANY MOBILE BASE PROBLEMS YOU MIGHT HAVE HAD. ITS A LITTLE OVER PRICED FOR A PIECE OF SHEET METAL AND A STANDARD PLASTIC DUST CHUTE ( PART # 406-12-026-0001). IT WOULD... more info	Customer Rating: 4.0 / 5.0 Click here for more information

1 - 10

Portions © Amazon.com, Inc.

Also visit Main Street Tool & Supply Co.

Sponsor Results:

Work Boots at the lowest prices guaranteed at BootBay! click here
BootBay - Guaranteed Lowest Prices! click here
Free Shipping on BootBay! - click here