22.5° Chamfer Router Bit

Plus, the segments will align perfectly for a professional -looking project, 1" cutter height,1/2" shank.

Top quality bits that meet the high demands of Rockler Woodworking and Hardware. A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life.

Quality performance features include:

• K10 and K20 grade carbide for clean cutting action.
• final sharpening with 600 - 800 grit diamond wheels.
• Precision balanced for smooth operation.

These larger bits are designed to be used in a router table.

If you are not 100% satisfied with these bits, send them back for a refund.

Router Safety Tips: It's easy to prevent mishaps if you take a few simple precautions. 1) Rockler recommends using 1/2" shank router bits whenever possible. 1/2" shanks provide better stability with less vibration to produce a smoother cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.