Amana Handrail / Table Edge Bit

 

Buy Amana Handrail / Table Edge Bit

Item No.ItemPrice
95572Amana Handrail / Table Edge Bit 2-3/4 D x 1-3/4 R$134.99
95580Amana Handrail / Table Edge Bit 2-1/4 D x 3/8 R$139.99
95598Amana Handrail / Table Edge Bit 2-1/2 D x 3/8 R$139.99

2 Flute With Ball Bearing Guide
Warning: Maximum RPM 16! = 16,000
Tool No.
D
R1
R2
B
d
L
16!
95572
2-3/4
1-3/4
---
5/8
1/2
2-1/2
16!
95580
2-1/2
3/8
---
3/4
1/2
2-3/4
16!
95598
2-1/2
3/8
1/4
3/4
1/2
2-3/4

100% GuaranteeIf you are not 100% satisfied with these bits, send them back for a refund.


Router Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.

1) Rockler recommends using 1/2" shank router bits whenever possible. 1/2" shanks provide better stability with less vibration to produce a smoother cut and longer cutter life.
2) Make multiple light passes rather than one heavy cut.
3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch.
4) Use a router table whenever possible.
5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber.
6) Always follow your router manufacturer's recommendations.


All brands and product names are trademarked or registered trademarks of their respective companies.
Prices, specifications, and availability are subject to change without notification. E.&O.E.
Image & Description provided by and used with permission from Rockler Companies, Inc..
Page revised: Wednesday, June 7, 2006.